Philips BDS4223V Contrast, Brightness, Tint, Sharpness, Noise Reduction, Color Temp, Format

User Manual BDS4223V

Explanation of Various Picture Control Settings

Explanation of each available picture control settings are listed in the table below.

CONTRAST

Adjust Contrast to increase or decrease the level of white in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with Brightness.

BRIGHTNESS

Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow scenes. Increasing brightness will make dark areas more visible.

COLOR

Use color to adjust the color saturation of the video picture. Increasing color will make the color more intense. Reducing color setting will make the color less intense.

TINT

Use tint to adjust the color of fleshtones. Increase in the right direction will shift the picture with more green in appearance. Decreasing setting in left direction will shift the picture with more red in appearance.

SHARPNESS

Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting will enhance the edges of objects in the video picture. Decreasing the setting will reduce enhancement.

NOISE REDUCTION

To improve the quality of the picture in the case of poor reception.

COLOR TEMP

Select the color temperature for white balance. There are four settings to choose from: (1) COOL sets to 11000K; (2) NATURAL - sets to 9300K; (3) WARM - sets to 6500D.

FORMAT

Use to change various screen width modes. There are six modes to choose from: (1) 16:9, (2) 4:3, (3) Panorama, (4) Zoom 1, (5) Zoom 2. See page 28 for more information

IMAGE SHIFT

Use the Image Shift function to prevent image stikking effects when a static image is displayed for a long period of time. Increase the value to extend the time interval between each image shift operation.

V-SIZE

Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical direction. Decrease to reduce the picture size in the vertical direction.

V-POSITION

Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture down.

H-SIZE

Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction. Decrease to reduce the picture size in the horizontal direction.

H-POSITION

Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift the picture to the left.

CLOCK PHASE

Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under RGB mode.

Note:

H-Position, H-Size, V-Position and V-Size adjustments are only available in RGB and Component input modes.

32