User Manual BDS4223V
7.5SETTING POWER SAVE MODE
Using OSD Menu
This monitor is equipped with a Power Save mode under RGB input modes. When there are no signals detected by the monitor, the monitor will automatically go into sleep mode until signal is restored.
1Press the MENU on the monitor panel or remote control.
2Use the SEL 
or SEL 
key to select the SETUP option from the menu.
3Press the ADJ 
key to confirm the selection.
=> Various options are available in the SETUP menu.
4Use the SEL 
or SEL 
key to select the POWER SAVE option
5Press the ADJ 
key to confirm selection. => The POWER SAVE menu appears.
6Use the ADJ 
or ADJ 
key to select the desired amount of time to power down when no signal is detected (1MIN, 2MIN, 3MIN, 4MIN and 5MIN).
7Press the SEL 
key to confirm setting and return to previous menu.
Note:
To turn on the monitor from sleep mode, simply follow Power On procedure.
45