Philips EIP-4500 user manual Adjust Ambilight settings, Adjust LightGuide brightness

5.4Adjust Ambilight settings

1.Press MENU on the remote control and select TV menu > TV settings > Ambilight.

2.Press Æ to enter the list.

TV settings	Ambilight
Settings assistant	Ambilight
Reset smart settings	Brightness
Picture	Mode
Sound	Colour
Ambilight	Separation
	Balance

3.Press Î or ï to select one of the following settings:

•Ambilight

Switches Ambilight On or Off.

•Brightness

Changes the light output of Ambilight.

•Mode

Choose from four Ambilight modes: Colour, Relaxed, Moderate, Dynamic. See Section 4.5.1 Change Ambilight mode.

•Colour

Select a pre-definedcolour setting (Warm white, Cool white, Blue) or make a custom colour of your own.

DDNote

When making a custom colour, select Saturation first, setting the value high. Then select Palette and choose a value between 0 to 100.

•Separation

Sets the level of Ambilight colour on the left and right side of the TV. Maximum, Medium, Minimum and Off levels are available.When Off is selected, only mono colour Ambilight is displayed.

•Balance

Sets the level of Ambilight on the left and right side of the TV.

EN-22

CCCaution

To avoid poor remote control reception, do not place remote control sensors on your devices in range of Ambilight.

5.4.1Enable Ambilight when TV is in standby mode

When the TV is in standby mode, you can

switch on Ambilight to enhance the ambience of your room. Ambilight is only available as constant colour in this mode.

1.Press AMBILIGHT on the remote control when the TV is in standby.

2.Press MODE repeatedly to select an available colour.

5.5Adjust LightGuide brightness

1.Press MENU on the remote control and select TV menu > Installation > Preferences > LightGuide Level.

2.Press Æ to enter the LightGuide Level menu.

3.Use Î or ï to select the LightGuide brightness:

•0: Off

•1: 25%

•2: 50%

•3: 75%

•4: Full

4.Press OK to confirm.

5.Press MENU to exit.