Philips EIP-4500 Prepare TV for digital services, Using the Conditional Access Module, EN-46

Page 48

7.6Prepare TV for digital services

Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM) and a Smart card provided by a digital TV service operator.

The CAM may enable several digital services, depending on the operator and services you choose (for example, pay TV). Contact your digital TV service operator for more information about services and terms.

7.6.1Using the Conditional Access Module

BBWARNING

Switch off your TV before inserting a CAM. Be sure to follow the instructions described below.Wrong insertion of a CAM may damage both the CAM and your TV.

1.Following the directions printed on the CAM, gently insert the CAM into the Common Interface on the side of the TV.

2. Push the CAM in as far as it will go.

3.Turn on the TV and wait for the CAM to be activated.This may take several minutes.

EN-46

DDNote

Do not remove the CAM from the slot. Removing the CAM will deactivate the digital services.

7.6.2 Access CAM services

•After inserting and activating the CAM,

press MENU on the remote control and select TV menu > Features > Common interface.

This menu option is only available if the CAM is correctly inserted and activated. On-screen appplications and content are provided by your digital TV service operator.

Image 48

Contents Register your product and get support at Country Number Tariff Austria 0810 Belgium 078250145Germany 01803 386 Luxembourg 40 6661 Local Netherlands 0900Table of contents Koninklijke Philips Performing source distribution, a Safety To avoid risk of fire or electric shock, doTV yourself If the TV is mounted on a swivel base or Environmental care Screen careYour TV TV overviewRemote control Program + Volume +From left Red, green, yellow, blue Up Î, Down ï, Left Í, Right Æ, OKGet started Position the TVWall mount the TV Purchase a VESA-compatible wall BracketRemove the TV stand DDNote Secure the VESA-compatible wall bracket to the TVLocate the four mounting nuts at the back of the TV Connect the antenna cable Connect the mains cordTo connect the mains cord DDNote According to TV modelInsert the remote control batteries Switch on the TVFirst time setup EETipSwitch your TV on/off or to standby Use your TVSwitch channels Switch channels digital receiver Adjust volumeWatch TV Watch connected devicesUse teletext Use AmbilightRemote control overview Use more of your TVThis section helps you perform advanced TV operations EN-14Program P + ModeMute MenuUse TV menus Use the Quick access menu Audio language digitalSubtitle Picture formatAdjust picture and sound settings Use smart settings Custom tintPixel Plus HD Natural MotionChange picture format ou use Auto format Movie expand 149 Not for HDAuto format Not for PC ou use Auto format Movie expand 169 Not for HD DDNoteAdjust sound settings VolumeTV menu Installation Preferences Bar on or Volume bar offAdjust Ambilight settings Adjust LightGuide brightnessChange to Shop or Home mode Use advanced teletext featuresUse digital text services UK only Enlarge teletext pagesCycle subpages LanguageSetup a favorite list Create favorite listsSelect a favorite list Select a channel from a favorite listUse the Electronic Programme Guide Use timers and Child lock Automatically switch the TV to standby SleeptimerAutomatically switch the TV on On timer Lock TV channels or connected devices Child lockUse subtitles Enable subtitles on digital TV channels View photos and listen to MusicSelect a subtitle language on digital TV channels DDNote Connect a USB storage deviceSlide show settings No details/More details View your photosTransitions Slide timeUpdate your TV software Listen to digital radio channelsUpdate software analogue broadcasts DDNote Select Start nowInstall channels Automatically install channelsManually install channels Install channelsSelect your system DDNote Search and store new TV channelsUninstall or reinstall Channels Manually update the channel listRename channels Rearrange channelsReset TV to factory settings Test digital receptionStart a demo Back connectors EXT Connect devicesConnection overview Hdmi 1/2/3Select connection quality USBHdmi Hdmi Highest qualityComponent Y Pb Pr Higher quality Video Good qualityScart Good quality Composite Basic qualityConnect devices Blu-ray Disc playerDVD player Satellite receiver HD digital receiverEN-41 Combined DVD recorder and digital receiver Separate DVD recorder and receiverEN-42 If using a home theatre or other audio DVD recorder and home theatre systemEN-43 Setup devices Personal Computer Before connecting the PCAssign devices to connectors Game console or camcorderUse Philips EasyLink Prepare TV for digital services Using the Conditional Access ModuleAccess CAM services Push the CAM in as far as it will goSupported display resolutions Computer formats PowerVideo formats Tuner / Reception / TransmissionTroubleshooting General TV issuesTV channel issues Picture issuesSound issues Hdmi connection issuesUSB connection issues PC connection issuesContact us Index Mains Noise reduction On timer EN-53Sound Teletext Adjust settings P broadcasts Timers Automatic volume leveling On timer Auto surroundHeadpphone volume Mono/Stereo Ambilight VolumeOverview Volume Use Remote controlBatteries Reset to factory setting Pb Pr Timers On timer