30 One-Touch Recording
The
Before you begin, make sure:
●Channels are set up.
●There is a tape in the TV/VCR. The record tab must be intact.
4 Press the STOP/EJECT but- ton on the TV/VCR to stop the OTR.
1
Use the CH(annel) m/n button or the Number buttons to select the channel you want to record.
2
POWERSLEEP
PLAY
REWF.FWD
STOP
MENU | STATUS/EXIT | CLEAR |
Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29.
3
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.
OTR | LENGTH 0:30 |
CH12 |
|
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
2
3
1 2 3
4 5 6
7 8 9
0ALT. CH
SPEED MEMORY PAUSE/STILL
REC/OTR TRACKING
CH.1
VOL.
MUTE
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote control.
Helpful Hints
•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.
•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen.
•You can not pause an OTR.
•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.
•You cannot record if DEFEAT RECORDING is set to ON. Details are on page 36.
•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.