Philips CCA092AT owner manual Specifications, Glossary

Page 47

Specifications

General

CRT: 9-inch in line gun

Television system: NTSC-M

Video Heads: Two heads

Tape width: 1/2 inch (12.65 mm) Tape speed

SP: 33.35 mm/sec.

LP: 16.67 mm/sec.

SLP: 11.12 mm/sec.

Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)

Relative Humidity: 10% to 75%

Power requirement: AC 120V/DC 13.2V, 60Hz

Power consumption: 65W (AC/DC)

Sound output: 0.8W Dimensions:

13" (H) x 12-1/8" (W) x 13" (D) 330mm x 308mm x 330mm

Weight: 18.8 lbs (8.5 kg)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

Midband: A – 1

Superband: J – W

Hyperband: A-5A-1

Special Channel: 5A

Ultraband: 37 – 94, 100 – 125

Terminals

Antenna In: VHF/UHF 75 ohms unbalanced

Video In: RCA connector

Audio In: RCA connector

Earphone: 3.5 mm CES

Electrical Specifications

Video input level: 0.5~2.0Vp-p

Audio input level: -10dBv

Video S/N ratio

SP: More than 42dBµ

Audio S/N ratio

SP: More than 38dB

Designs and specifications are subject to change without notice and without our legal obligation.

Specifications/Glossary 47

Glossary

AUDIO Jack: jack located on the front of the TV/VCR which is used to record audio from anoth- er source.

Automatic Channel Setup: process in which the TV/VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL o/p buttons, you only scan through channels you receive.

Bands: settings that allow you to tune channels.

Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69).

Cable – all standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on the screen.

Color: adjusting pales or brightens the TV/VCR color.

Dubbing: copying a tape using a VCR.

HQ: high quality; a feature in the TV/VCR circuitry which provides enhanced picture detail.

Line Input: The channel to which you set your TV/VCR during dubbing. The line input channel is always channel 00 (A/V IN).

Mode: a TV/VCR operation.

OTR: One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichever you specify.

Picture: adjusting increases or decreases the con- trast of the picture on the screen.

Sharpness: adjusting softens or clarifies the picture on the screen.

Tape Speeds: how fast the tape travels during playback or recording.

SP (standard play) – fastest tape speed (record- ing time for a T120 tape is approximately two hours); best picture quality.

LP (long play) – average tape speed; playback only.

SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).

Tint: adjusting changes the tints of the picture on the TV/VCR from purple to green.

VIDEO Jack: jack located on the front of the TV/VCR which is used to record video from anoth- er source.

Image 47
Contents CCA092AT For Customer Use Dear Philips Magnavox product ownerPhilips Consumer Electronics Company recommends that you FeaturesSafety Precautions IntroductionTable of Contents Erasure Prevention Putting Batteries in the Remote ControlUsing the Remote Control TV/VCR MaintenanceHooking Up the TV/VCR Hook up your TV/VCR using one of the connections shownStraight Pin Rod Antenna suppliedCrooked Pin To Cigarette Lighter Car battery cordHooking Up the TV/VCR cont’d Mobile ConnectionsTurning On the TV/VCR You cannot set up channels if you are using a Cable BoxPress the Menu button Language SelectionAutomatic Channel Setup Press the PLAY/ o button or the STOP/ p button to select Adding/Deleting ChannelsCable Box users must set the clock manually Manual Clock SettingInstructions continue on Setting the Clock cont’d Automatic PBS Channel Selection Setting the Clock cont’dWait for the TV/VCR to find the time Manual PBS Channel Selection Use the Number buttons to select your PBS station Press the PLAY/ button or the STOP/ button toSelect SET PBS CH. MANUAL. Then, press the F.FWD/B Daylight-Savings Time Time Zone Primary SetupFront Panel AC 120V Jack Rear PanelANTenna Jack DC 13.2V JackRemote Control Buttons Remote Control Buttons cont’d If you select Status OFF If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on Adjusting the Picture Controls Softer Adjusting the Picture Controls cont’dDecrease Increase More brilliantPlaying Recording options are on pages RecordingOne-Touch Recording Different brands of equipment may operate differently Rerecording Tape DuplicationDaily Timer RecordingTimer Recording cont’d Timer Recording cont’d VCR PROGRAM, then press the F.FWD/B button Checking or Clearing Timer RecordingsWith the TV/VCR on, press the Menu button Press the PLAY/ button or the STOP/ button to selectDefeat Recording Repeat Play Insert a tape in the TV/VCR Press the Menu button B Repeat PlayPress the STATUS/EXIT button to remove the display. a Repeat Play cont’dPress the STATUS/EXIT button. The real-time counter will Real-Time Counter MemoryViewing a Still Picture Playback OptionsForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPGround Blue BackgroundSleep Timer Volume Bar Reminder Automatic Operation Features Glossary SpecificationsHelpful Hints Helpful Hints cont’d TV/VCR Combination Limited WarrantyControls Remote 23-24 Tv/vcr IndexSupplied Accessories