Philips CCB 134AT, CCB 194AT owner manual Helpful Hints

Page 64

64 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself.

If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our represen- tatives will be happy to assist you.

Location

For safe operation and satisfactory performance of your TV/VCR, remember the following:

•Shield it from direct sunlight and keep it away from sources of intense heat.

•Avoid dusty or humid places.

•Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.

•Avoid locations subject to strong vibrations.

•Do not place the TV/VCR near strong magnetic fields.

•Do not move the TV/VCR from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

•Do not handle the power cord with wet hands.

•Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out- let. Grasp it by the plug.

•If water is spilled on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho- rized service center.

•Do not put your fingers or objects into the TV/VCR cassette compartment.

•Do not place anything on top of the TV/VCR.

Dew Warning (Moisture Condensation)

•Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture has accumulated in your TV/VCR. If you try to play a tape in a TV/VCR in which moisture has accumulated, the tape and the TV/VCR could be damaged. If you think moisture may have accumulated inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.

TV/VCR will not perform a timer recording.

•Make sure the recording start and stop times are set correctly. Details are on pages 34-37.Midnight is 12 a.m. Noon is 12 p.m.

•Make sure the TV/VCR power is off.

•Make sure the clock is set. Details are on pages 12-17.

•Make sure there is a tape in the TV/VCR. The tape must have a record tab.

•With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro- grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati- cally if you are using the AUTO CLOCK feature. Details are on pages 14-17.If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.

•Make sure DEFEAT RECORDING is set to OFF. Details are on page 33.

TV/VCR will not record.

•Make sure the tape has a record tab. Details are on page five.

•Make sure DEFEAT RECORDING is set to OFF. Details are on page 33.

•Plug the power cord into an active AC outlet. Details are on page seven.

•Check your hookups. Details are on pages six-seven.

•Set up the channels. Details are on page 10.

Page 63 Page 65
Image 64
Page 63 Page 65
Contents CCB134AT CCB194AT Dear Philips product owner For Customer UseThis bolt of lightning indi- cates uninsulated material Model No Serial NoFeatures Safety PrecautionsIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Using the Remote ControlTV/VCR Maintenance Erasure PreventionHooking Up the TV/VCR Hook up your TV/VCR using one of the connections shownRod Antenna Hooking Up the TV/VCR cont’d AUDIO/VIDEO Jacks on frontBent pin Crooked Pin Straight PinTurning On the TV/VCR Press the Combi button, then press the Power buttonPress the Menu button. The screen shown below will appear Language Selection Press the Combi button, then press the Menu buttonAutomatic Channel Setup Wait for the TV/VCR to set up channelsAdding/Deleting Channels Press the PLAY/o button or the STOP/p button to selectRepeat steps 3-4 to add or delete other channels Programming of the last channel you selected will appearManual Clock Setting Setting the ClockCable Box users must set the clock manually Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionTime Wait for the TV/VCR to findNOW Searching flashes on the TV/VCR screen Manual PBS Channel Selection Use the Number buttons to select your PBS station Wait for the TV/VCR to find the timeDaylight-Savings Time Time Daylight Savings TimeTime Zone PRIM. SETUP. Then, press the F.FWD/B buttonPress the PLAY/ button or the STOP/ button to select Press the Mute button Setting the Remote to Operate a Cable Box/DBSWithin 30 seconds, press the CABLE/DBS button Setting the Remote to Operate a Cable Box/DBS cont’d Earphone Jack Volume o/ p Buttons Wireless Remote SensorPower Button Cassette CompartmentAC Power Cord Rear PanelANTenna Jack Connect your antenna or cable hereRemote Control Buttons VOLume m/ n Button PAUSE/STILL ButtonMemory Button REWind/ ButtonAdjusting the Picture Controls Adjust the picture control. Refer to the chart onWhen you finish, press the STATUS/EXIT button Press the REWind/ button or the F.FWD/B button toDecrease Increase Decreased brightnessOn-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFFPlaying Insert a tape in the TV/VCRRecording Power button to turn on the TV/VCR, if necessaryPress the RECord/OTR button once to start recording One-Touch Recording OTRRerecording Tape Duplication Different brands of equipment may operate differentlyDefeat Recording Follow the steps below to prevent accidental recordingLowed by the SET Clock menu Timer RecordingDaily Timer Recording cont’d Timer Recording cont’d FM 0 Surf VOLChecking or Clearing Timer Recordings TV Channels Setting Up the VCR Plus+ Programming SystemStation Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System You have completed the steps on pagesTimer Recording With the VCR Plus+ Programming System cont’d Real-Time Counter Memory Appear on the screenON-SCREEN Mode Defeat Recording OFF Repeat PlayB Repeat Play Insert a tape in the TV/VCRRepeat Play cont’d Flashing a will become a flashing BPlayback Options Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureBlue Background SmartLock To block ratings, follow the steps belowRatings are defined on SmartLock cont’dExample Specific Sub-ratings To change the access code, follow these steps After you enter the code, the Smartlock menu will appearTo check the SmartLock settings, follow these steps TV-Y7Timer during a recording Sleep TimerPress the Combi button, then press the SLEEP/WAKE UP button Wake Up Timer Closed Caption ExampleMenu ScreenStandard Closed Captions Closed Caption cont’dHalf-screen text Volume Bar/Smart Sound Volume BarVolume will stay at the same level Smart SoundAutomatic Operation Features SmartPicture/FM Radio SmartPictureFM Radio Follow the steps below to listen to FM radio stationsIf another remote control beeps Press the Mute button, then press the PAUSE/STILL buttonReminder Press the Combi button, then press the Menu buttonIndex Search Specifications Glossary Helpful Hints Helpful Hints cont’d Please contact Philips at French Speaking English Speaking Limited WarrantyModel # Serial # Index Supplied Accessories
Top Page Image Contents