Rerecording (Tape Duplication) 31
1
Make the connections of D. on page seven, using audio and video cables.
2
The source unit (VCR or camcorder) will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR will turn on automatically.
4
Point the remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears
5
Point the remote control at the TV/VCR. Press the (Tape) SPEED button until the desired tape speed (SP, LP, or SLP) appears
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder).
Helpful Hints
• Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
• Different brands of equipment may operate differently.
• Make sure all connections are secure. Otherwise, you may not record both picture and sound.
• Audio and video cables are not included.