Philips CCX252AT Hooking Up the TV/VCR, Hook up your TV/VCR using one of the connections shown

Page 6

6 Hooking Up the TV/VCR

1

Hook up your TV/VCR using one of the connections shown.

A.

Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna

Connect a Cable signal or an antenna to the ANT(enna) Jack.

ANT.

ANT.

B.

Hooking Up Your TV/VCR With a Cable Box

To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.

Connect the Cable signal to the IN Jack on the Cable Box.

Connect an RF coaxial cable (75- ohm, not supplied) to the OUT Jack

on the Cable Box and to the	OUT	IN
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.

ANT.

ANT.

C.

Hooking Up Your TV/VCR With an Indoor Antenna

To install a rod antenna (not sup- plied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.

Rod Antenna

(not supplied)

ANT.

ANT.

Image 6

Contents CCX252AT Dear Philips Magnavox product owner For Customer UseVideo heads, which may not be covered by the warranty if FeaturesSafety Precautions IntroductionTable of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Replace the battery compartment lidHook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRod Antenna Hooking Up the TV/VCR cont’d Jacks on VCRCrooked Pin Straight Pin Turning On the TV/VCR Language Selection Press the Menu button to display the pop up menuChannel Memory Enter the channel number you want to add or delete Adding/Deleting ChannelsPress the Number 3 button to select ADD/DELETE Channel Programming of the channel you added or deleted will appearCable Box users should set the clock manually Setting the ClockManual Clock Setting Press the Number 6 button to select SET ClockSetting the Clock cont’d Press the Number 2 button to select SET Manual ClockSetting the Clock cont’d Automatic PBS Channel SelectionPress the Menu button to display the pop up menu Wait for the TV/VCR to find TimePress the Number 1 button to select SET PBS CH Manual PBS Channel Selection Find the time Use the Number buttons to select your PBS stationNOW Searching flashes on the TV/VCR screen Daylight-Saving Time Press the PLAY/ button or the STOP/ button to selectTime Zone Press the Number 4 button to select SET Time ZonePress the STATUS/EXIT button twice Front Panel ANTenna Jack Antenna Hole Connect your antenna or cable hereRemote Control Buttons FWD/+ Button ALT. CH Alternate Channel ButtonMute Button STOP/ ButtonAdjusting the Picture Controls Decrease Increase Decreased brightnessPress the REWind/- button to decrease a picture control On Mode On-Screen Status DisplaysReminder Playing Recording Press the RECord/OTR button once to start recordingOne Touch Recording OTRRerecording Tape Duplication Copying will beginTimer Recording Select a once, daily, or weekly recordingTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Record Defeat Record DefeatFollow the steps below to prevent accidental recording Setting the Sleep Timer Menu Closed CaptioningExample ScreenClosed Captioning cont’d Standard Closed CaptioningText Screen Volume Bar Repeat Playback Repeat PlaybackB Repeat Playback Repeat PlayInsert a tape in the TV/VCR Repeat Playback cont’d Real Time Counter Memory Appear on-screenAutomatic Operation Features Super High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still PictureSpecifications GlossaryHelpful Hints Helpful Hints cont’d Limited Warranty Please contact Philips at French Speaking English SpeakingModel # Serial # Index Supplied Accessories