Setting the Sleep Timer 37
Use the sleep timer to program the TV/VCR to shut off in a cer- tain amount of time.
1
Press the SLEEP button. The sleep timer display will appear
SLEEP 0 MIN
2
Within five seconds, press the SLEEP button repeatedly to select 30 minutes, 60 minutes, 90 minutes, or 120 min- utes. In a few seconds, the display will disappear. Then the TV/VCR will shut itself off after the specified amount of time. One minute before the TV/VCR shuts itself off, the seconds will count down
GOOD NIGHT appears on the TV/VCR screen 10 seconds before the TV/VCR shuts itself off.
POWER |
|
| SLEEP |
| 2 | 3 | ALT.CH |
1 |
| ||
4 | 5 | 6 | o |
|
|
| CHANNEL |
7 | 8 | 9 | p |
| 0 | +100 | o |
SPEED |
| MUTE | VOLUME |
|
|
| p |
| o |
| |
| PLAY |
| |
– REW |
| F.FWD + | |
| STOP |
| |
| p |
| |
REC/OTR | MEMORY | PAUSE/STILL | |
|
|
| o |
MENU | STATUS/EXIT | CLEAR | TRACKING |
|
p
SLEEP 10 SEC
GOOD NIGHT
●To see how much time remains until the TV/VCR shuts itself off, press the SLEEP button once. The time remaining will appear
●To cancel a sleep timer setting, press the SLEEP button until 0 MIN appears
Helpful Hints
• You can start a recording after the sleep timer is set. If the recording finishes before the TV/VCR shuts itself off, the TV/VCR will shut itself off as programmed with the sleep timer. If a recording is in progress, the programmed sleep timer will be cancelled.
• A timer recording will not begin until after the TV/VCR shuts itself off. Two minutes before a timer recording starts, PLEASE TURN OFF FOR TIMER RECORDING flashes
• If the power fails, you might lose the sleep timer setting.