Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.
2
Place two AA batteries inside the battery compartment with their polarities (+ and – ends) aligned as indicated.
3
Replace the battery compartment lid.
Erase Protection
Before Using the TV/VCR 5
1
2
3
Video cassette tapes have record tabs to ensure that recordings | 1 |
are not accidentally erased. | |
1 |
|
To prevent accidental erasure, break off the tab with a |
|
screwdriver. |
|
2 | 2 |
To record again, cover the hole with cellophane tape. |
Using the Remote Control
●Point the remote control at the TV/VCR’s remote sensor.
●Do not put objects between the remote control and the TV/VCR.
TV/VCR Maintenance
●In this TV/VCR, use only tapes with the mark.
●Make sure any light adhesive
●Periodic maintenance is required to maintain your TV/VCR’s continued excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Cleaning or replacement of the video heads should be performed by an authorized service cen- ter.
Helpful Hints
•The remote control and its batteries are supplied.
•Do not mix alkaline and man- ganese batteries.
•Do not mix old and new batteries.