Philips SVA104 owner manual Playing, Read and follow the steps below to play a tape

Page 23

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

Playing 23

1Turn on the TV.

2Insert a tape.

2

Insert a tape in the VCR. The POWER, VCR/TV, and CST.IN lights will appear. If the tape’s record tab has been removed, play- back will begin automatically.

3

If playback does not start automatically, press the PLAY button.

4

Press the STOP button to stop playback.

5

Press the REWIND button to rewind the tape.

6

Press the EJECT button to remove the tape.

		POWER		VCR/TV	EJECT	6
		1	2	3		6
		4	5	6
		7	8	9	CHANNEL
		SPEED	0	+100
		SLOW	QUICK-	SEARCH
		SLOW	FIND	TIME	INDEX	3
			FIND
		MENU	DISPLAY	EXIT	COUNTER
	5			RESET	MEMORY
	5	REWIND	/ PLAY		F.FWD
		REWIND	/ PLAY		F.FWD
		RECORD		/ STOP	PAUSE/STILL
	4

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (Press the VCR/TV button so that the VCR/TV light appears.) Then, press the PLAY but- ton.

•Other playback options and fea- tures are on pages 34 - 41.

Image 23

Contents Video Cassette Recorder For Customer Use Warranty VerificationIntroduction FeaturesSafety Precautions Table of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemPlug in the TV and the VCR CH3 CH4Recording/Viewing Any Channel ConnectionsCable SignalRecording One Channel/Watching Another Cable Box/DBSHookups With a Stereo TV 2Turn on the TV Turning on Your VCRAutomatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the Clock96-7 Setting the Clock cont’dLanguage Selection Press the Counter RESET/EXIT button to exitOn-Screen Status Displays OFF mode Press the Display button once Count modePress the Display button once Clock mode Remote Control Buttons Index Search Button Counter RESET/EXIT ButtonEject Button Time Search ButtonVCR Display Panel Front Panel Video in Jack AC Power CordRear Panel Video OUT JackRead and follow the steps below to play a tape Playing1Turn on the TV Insert a tape RecordingStopping an OTR One-Touch RecordingStarting an OTR Program Number → Once Daily Weekly Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’d4Press the Counter RESET/EXIT button to exit Correcting a Timer Recording Cancelling a Timer RecordingAuto Return Auto Satellite Link Using a Satellite Tuner Put the VCR in VCR position. The VCR/TV light will appear Press the VCR/TV button on the VCR remote control toRecording One Channel/Watching Another To return to the channel being recorded, use the TVAntenna Rerecording Tape DuplicationRepeat Play Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPTo on or OFF Rental PlayMenu will disappear, and Rental on or Rental Press the Play button to watch the tape Real-Time Counter MemoryIndex Search Time Search is not available during recording Time SearchTo resume normal tape playback, press the Play button Quick FindAutomatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or GlossarySpecifications Video Cassette Recorder Limited WarrantyIndex Supplied Accessories