Philips SVA102 owner manual Automatic Channel Setup

Page 12

12 Automatic Channel Setup

Although your VCR may automatically set up the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make sure:

●The VCR is on and is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.)

1

Press the MENU button repeatedly until the INITIALIZE menu appears.

INITIALIZE

→CHANNEL SET UP SETTING CLOCK LANGUAGE SELECT

2

Press the PLAY button or the STOP button repeatedly to select CHANNEL SET UP. Then, press the F.FWD but-

CHANNEL SET UP

→AUTO TUNING ADD/DELETE CH

3

Press the PLAY button or the STOP button repeatedly to select AUTO TUNING.

4

Press the F.FWD button. The VCR will memorize all available channels. When setup is complete, the lowest channel you receive will appear on the screen.

POWER

VCR/TV

EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

		0		+100
	SPEED	RENTAL		AUTO	CLOCK/
1	SPEED	SELECTOR		REPEAT	COUNTER
		SELECTOR		REPEAT	COUNTER
	MENU DISPLAY			EXIT	COUNTER	2
				RESET	MEMORY
	REWIND		/ PLAY		F.FWD
	RECORD		/ STOP		PAUSE/STILL

34

Helpful Hints

•Line Input mode will always be stored in the VCR’s memory as channel 00. When you select chan- nel 00 with the CHANNEL o/p buttons or the Number buttons, AUX will appear on the screen.

•You can not program channels if you are using a Cable Box/DBS. Details are on pages eight-nine.

Image 12

Contents Video Cassette Recorder Warranty Verification For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents Putting Batteries in the Remote Control Using the Remote ControlVCR maintenance Replace the battery compartment lidHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCRHookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Select the channel you want to watch at the Cable Box/DBSHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Automatic Channel Setup cont’d Adding/Deleting ChannelsSetting the Clock Follow the steps below to set your VCR’s clock. Make sureSetting the Clock cont’d 96-7Press the Counter RESET/EXIT button Language SelectionOFF mode Press the Display button once Count mode Press the Display button once Clock modeOn-Screen Status Displays Remote Control Buttons Power ButtonNumber Buttons Rental Selector ButtonCounter RESET/EXIT Button Eject ButtonAuto Repeat Button CLOCK/COUNTER ButtonVCR Display Panel Front Panel AC Power Cord Rear PanelAudio OUT Jack Video OUT JackPlaying Read and follow the steps below to play a tapeRecording 1Turn on the TV Insert a tapeStarting an OTR Stopping an OTRTimer Recording Program Number → Once Daily WeeklyTimer Recording cont’d Repeat the procedure in to set the recording’s end time4Press the Counter RESET/EXIT button to exit Cancelling a Timer Recording Correcting a Timer RecordingAuto Return Press the Play button or the Stop button repeatedly toSelect Auto Return Press the VCR/TV button on the VCR remote control to To return to the channel being recorded, use the TVPut the VCR in VCR position. The VCR/TV light will appear To stop recording, press the Stop buttonRerecording Tape Duplication RF coaxial cableRepeat Play Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureRental Play Real-Time Counter Memory Press the Play button to watch the tapeAutomatic Playback Features Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel Channel 3 orSpecifications Limited Warranty Video Cassette RecorderIndex Supplied Accessories