Philips SVA102 owner manual Playing, Read and follow the steps below to play a tape

Page 23

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

Playing 23

1Turn on the TV.

2Insert a tape.

2

Insert a tape in the VCR. The POWER, VCR/TV, and CST.IN lights will appear. If the tape’s record tab has been removed, play- back will begin automatically.

3

If playback does not start automatically, press the PLAY button.

4

Press the STOP button to stop playback.

5

Press the REWIND button to rewind the tape.

6

Press the EJECT button to remove the tape.

		POWER		VCR/TV	EJECT	6
		1	2	3		6
		4	5	6
		7	8	9	CHANNEL
			0	+100
		SPEED	RENTAL	AUTO	CLOCK/
		SPEED	SELECTOR REPEAT		COUNTER	3
			SELECTOR REPEAT		COUNTER
		MENU	DISPLAY	EXIT	COUNTER
	5			RESET	MEMORY
	5	REWIND	/ PLAY		F.FWD
		REWIND	/ PLAY		F.FWD
		RECORD		/ STOP	PAUSE/STILL
	4

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (Press the VCR/TV button so that the VCR/TV light appears.) Then, press the PLAY but- ton.

•Other playback options and fea- tures are on pages 33-37.

Image 23

Contents Video Cassette Recorder For Customer Use Warranty VerificationIntroduction FeaturesSafety Precautions Table of Contents Replace the battery compartment lid Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemPlug in the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’dRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections Select the channel you want to watch at the Cable Box/DBS Recording One Channel/Watching AnotherHookups With a Stereo TV 2Turn on the TV Turning on Your VCRAutomatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the Clock96-7 Setting the Clock cont’dLanguage Selection Press the Counter RESET/EXIT buttonOn-Screen Status Displays OFF mode Press the Display button once Count modePress the Display button once Clock mode Rental Selector Button Remote Control ButtonsPower Button Number ButtonsCLOCK/COUNTER Button Counter RESET/EXIT ButtonEject Button Auto Repeat ButtonVCR Display Panel Front Panel Video OUT Jack AC Power CordRear Panel Audio OUT JackRead and follow the steps below to play a tape Playing1Turn on the TV Insert a tape RecordingStopping an OTR Starting an OTRProgram Number → Once Daily Weekly Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’d4Press the Counter RESET/EXIT button to exit Correcting a Timer Recording Cancelling a Timer RecordingSelect Auto Return Auto ReturnPress the Play button or the Stop button repeatedly to To stop recording, press the Stop button Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearRF coaxial cable Rerecording Tape DuplicationRepeat Play Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPRental Play Press the Play button to watch the tape Real-Time Counter MemoryAutomatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or GlossarySpecifications Video Cassette Recorder Limited WarrantyIndex Supplied Accessories