Philips VRZ262AT owner manual Hookups With a Stereo TV

Page 10

VRZ262(H1920).QX33 4/9/99 9:32 AM Page 10

10 Hookups With a Stereo TV

	AUDIO		ANT
	AUDIO		IN
		L	IN
		L
	OUT	IN
		R
	VIDEO		OUT
	OUT	INCH3	CH4

	VIDEO (yellow) and	2
	AUDIO (red and white) OUT Jacks	2
	AUDIO (red and white) OUT Jacks

1 antenna or cable to

ANT(enna)

IN Jack

Video Cable

Audio and Video IN Jacks on TV

3 Audio Cable

●Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV.

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hints

• A stereo audio cable (not supplied) is used here to deliver audio to the TV’s left and right channels.

• The TV must be in Line Input mode. Please refer to your TV owner’s manual.

Image 10

Contents VRZ262AT Dear Philips Magnavox product owner For Customer UseSafety Precautions FeaturesIntroduction Table of Contents VCR maintenance Putting Batteries in the Remote ControlUsing the Remote Control Removing the Plastic Cover from the Front PanelHookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR CH3Connections Recording/Viewing Any ChannelHookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER ButtonRemote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Press the STATUS/EXIT button. Program WAS COM Timer Recording cont’dTape Speeds Checking or Cancelling Timer Recordings See page 48 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication VCRRepeat Play Press the F.FWD/B button so that on appears besidePress the VCR button Press the Time Search button Time SearchWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Multi-Channel Television Sound System Understanding On-Screen DisplaysMulti-Channel Television Sound System cont’d Press the RECord/OTR button to start recordingPress the VCR button, then the Menu button Hi-Fi Stereo Sound SystemPlease see additional notes on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex VRZ262H1920.QX33 4/9/99 933 AM VRZ262H1920.QX33 4/9/99 933 AM Supplied Accessories