Philips VRZ262AT owner manual Timer Recording, Daily

Page 30

VRZ262(H1920).QX33 4/9/99 9:33 AM Page 30

30 Timer Recording

Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin:

Set up the channels at the VCR.

Set the clock.

Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

Put the VCR in VCR position. The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

1

Press the VCR button, then press the MENU button.

SELECT op CHOOSE B

PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

2

Press the PLAY/o button or the STOP/p button to select PROGRAM, then press the F.FWD/B button.

SELECT op CHOOSE B

ONCE DAILY WEEKLY PROGRAM REVIEW

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

DAILY: The VCR will record every day from Monday to Friday

– starting at the same time and recording for the same length of time.

WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.

Daily

DAILY PROGRAM (MON-FRI)

PROGRAM -1 2 3 4 5 6 7 8-

Recording (example)

SELECT PROGRAM NUMBER

TO END PUSH EXIT

2-3

POWER

VCR

TV

CBL/DBS

 

2

3

VCR/TV

1

 

4

5

6

 

 

 

 

CHANNEL

7

8

9

 

VCR PLUS+

 

 

 

/ENTER

 

 

 

0+100

SPEED

TIME SEARCH

MUTE

VOLUME

 

 

PLAY

 

 

REW

 

F.FWD

 

 

STOP

 

1

REC/OTR

MEMORY

SLOW

PAUSE/STILL

MENU

STATUS/EXIT

CLEAR

EJECT

Helpful Hint

If you need to make a correction while programming a timer record- ing, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the

correct information.

Image 30
Contents VRZ262AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents VCR maintenance Putting Batteries in the Remote ControlUsing the Remote Control Removing the Plastic Cover from the Front PanelHookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR CH3Connections Recording/Viewing Any ChannelHookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER ButtonRemote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Timer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings See page 48 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication VCRRepeat Play Press the F.FWD/B button so that on appears besideTime Search Press the VCR button Press the Time Search buttonWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Multi-Channel Television Sound System Understanding On-Screen DisplaysMulti-Channel Television Sound System cont’d Press the RECord/OTR button to start recordingHi-Fi Stereo Sound System Press the VCR button, then the Menu buttonPlease see additional notes on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex VRZ262H1920.QX33 4/9/99 933 AM VRZ262H1920.QX33 4/9/99 933 AM Supplied Accessories