Philips VRZ262AT owner manual Recording, VCR light does not appear, press the VCR/TV button once

Page 27

VRZ262(H1920).QX33 4/9/99 9:33 AM Page 27

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

Recording 27

1Turn on the TV.

2Insert a tape in the VCR.

2

Insert a tape with its record tab intact in the VCR.

3

Press the VCR button.

4

If the VCR light appears on the display panel, go to step 5. If the

3

5

POWER

VCR

TV

1 2 3

4 5 6

7 8 9

VCR PLUS+
/ENTER
	0	+100
SPEED	TIME SEARCH	MUTE
SPEED

CBL/DBS

VCR/TV

CHANNEL

VOLUME

4

6

VCR light does not appear, press the VCR/TV button once.

5

Press the SPEED button until the desired tape speed appears briefly on-screen. (Details about tape speed are on page 32.)

6

Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording. The REC light will appear.

8

To pause the recording, press the PAUSE/STILL button once. The REC light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC light will come on again.

9

To stop recording, press the STOP/p button.

		PLAY			9
	REW			F.FWD	9
	REW			F.FWD
7		STOP			8
7	REC/OTR	MEMORY	SLOW	PAUSE/STILL	8
	MENU	STATUS/EXIT	CLEAR	EJECT

Helpful Hints

•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.

•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on-screen.

•Other recording options are on pages 28 - 38.

•You can change the tape speed during a recording, but some distor- tion will appear on the tape.

•The VCR will record in a preset vol-

ume.

Image 27

Contents VRZ262AT For Customer Use Dear Philips Magnavox product ownerFeatures Safety PrecautionsIntroduction Table of Contents Removing the Plastic Cover from the Front Panel Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 Plug in the TV and the VCRRecording/Viewing Any Channel ConnectionsRecording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV 2Turn on the TV Turning on Your VCRPress the VCR button Press the Menu button Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsEnter a 0 before a single digit num- ber Setting the ClockDaylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find VCR PLUS+/ENTER Button Remote Control ButtonsRemote Control Buttons cont’d If you select Status ON, then select Counter only OFF On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only onVCR Display Panel Front Panel Rear Panel Playing VCR light does not appear, press the VCR/TV button once RecordingRecording One Channel/Watching Another One-Touch Recording Daily Timer RecordingTimer Recording cont’d Timer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds See page 48 for more hints Checking or Cancelling Timer RecordingsChannels Setting Up the VCR Plus+ Programming SystemSetting Up the VCR Plus+ Programming System cont’d Press the VCR PLUS+ /ENTER button Do each step within 60 seconds of the previous stepTimer Recording With the VCR Plus+ Programming System cont’d VCR Rerecording Tape DuplicationPress the F.FWD/B button so that on appears beside Repeat PlayTime Search Press the VCR button Press the Time Search buttonWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound SystemPress the RECord/OTR button to start recording Multi-Channel Television Sound System cont’dHi-Fi Stereo Sound System Press the VCR button, then the Menu buttonPlease see additional notes on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Cable Box Output Channel 03 or GlossarySpecifications Video Cassette Recorder Limited WarrantyIndex VRZ262H1920.QX33 4/9/99 933 AM VRZ262H1920.QX33 4/9/99 933 AM Supplied Accessories