Philips VRZ262AT owner manual Specifications

Page 51

VRZ262(H1920).QX33 4/9/99 9:33 AM Page 51

Specifications 51

Video Heads

Four heads – Hi-Fi

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 03 or 04 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

18W

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.73 lbs. (2.6 kg.)

Dimensions

14-3/16” (W) x 3-1/16” (H) x 10” (D) (360 mm x 92mm x 230mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

2 – 13 Midband: A – 1 Superband: J – W Hyperband: A-5A-1 Special Channel: 5A Ultraband: 37 – 94, 100 – 125

NOTE: Designs and specifications are subject to change without notice.

Image 51
Contents VRZ262AT For Customer Use Dear Philips Magnavox product ownerFeatures Safety PrecautionsIntroduction Table of Contents Removing the Plastic Cover from the Front Panel Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemCH3 Plug in the TV and the VCRRecording/Viewing Any Channel ConnectionsRecording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV 2Turn on the TV Turning on Your VCRPress the VCR button Press the Menu button Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsEnter a 0 before a single digit num- ber Setting the ClockDaylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find VCR PLUS+/ENTER Button Remote Control ButtonsRemote Control Buttons cont’d If you select Status ON, then select Counter only OFF On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only onVCR Display Panel Front Panel Rear Panel Playing VCR light does not appear, press the VCR/TV button once RecordingRecording One Channel/Watching Another One-Touch Recording Daily Timer RecordingTimer Recording cont’d Timer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds See page 48 for more hints Checking or Cancelling Timer RecordingsChannels Setting Up the VCR Plus+ Programming SystemSetting Up the VCR Plus+ Programming System cont’d Press the VCR PLUS+ /ENTER button Do each step within 60 seconds of the previous stepTimer Recording With the VCR Plus+ Programming System cont’d VCR Rerecording Tape DuplicationPress the F.FWD/B button so that on appears beside Repeat PlayTime Search Press the VCR button Press the Time Search buttonWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound SystemPress the RECord/OTR button to start recording Multi-Channel Television Sound System cont’dHi-Fi Stereo Sound System Press the VCR button, then the Menu buttonPlease see additional notes on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Cable Box Output Channel 03 or GlossarySpecifications Video Cassette Recorder Limited WarrantyIndex VRZ262H1920.QX33 4/9/99 933 AM VRZ262H1920.QX33 4/9/99 933 AM Supplied Accessories