Cisco Systems 78-10588-03 manual Power Consumption and Power Supply Fuses

Page 17

Chapter 3 Installing the Chassis

Connecting Power

Step 5 Turn the power on using the corresponding power switch of the PDU.

The chassis powers up as soon as the corresponding power switch of the PDU is turned on. If the DC power cables are not connected to the PDU, the plug socket combinations on the rear end of the unit serve as switches.

Power Consumption and Power Supply Fuses

The system power consumption is less than 150 W.

Use the following fuses:

Power Type

Fuse Type

No. of Fuses

 

 

 

AC version

2.5A at 250V, slow blow, 5 x 20 mm

2

 

 

 

DC version

6.3A at 250V, slow blow, 5 x 20 mm

2

 

 

 

Caution Always replace blown fuses with fuses of the same type and size.

Caution Do not use damaged terminal blocks. Immediately replace damaged or defective terminal blocks.

Note The 115/230V version automatically detects the input voltage. No further adjustment is necessary.

The Cisco Metro 1500 series system supports the following power sources:

AC

DC

110 to 240V, 50 or 60 Hz

-48 to -60V

 

 

Cisco Metro 1500 Series Hardware Installation Guide

 

 

 

 

 

 

78-10588-03

 

 

3-17

 

 

 

Image 17
Contents Before Installing Installing the ChassisUnpacking and Inspecting the System Mounting the System Maintaining a Network RecordInstalling the System Nemi master Installing the Nemi ModuleInstalling the Chassis Installing the System Demi location Installing the Demi ModuleConnecting Power Fan module Connecting AC PowerFront Panel of the Cisco Metro Installing Terminal Blocks US Version Connecting DC PowerTerminal blocks Holders Power supplyConnecting Wires Fan module Fuse holders DC Power connectorsSelv Application Power Cable Blue Brown Green/yellow Ferrules 48 VDC Application Power CablePower Type Fuse Type No. of Fuses Power Consumption and Power Supply FusesGrounding the Chassis Cleaning the SystemCleaning the Connectors Cleaning the ChassisInstalling the Chassis Cleaning the System Power On/Off Removing the Power Supply ModuleWCM RSM Nemi DMX Power 1 PowerDetermining Power Supply Status Fan module Fuse 11 Rear View of Power Supply ModuleVerifying Connections Running Online TestsMeasuring Channel Outputs and Channel Budgets Installing the Chassis Running Online Tests Problem Probable Cause Solution TroubleshootingProblem Probable Cause Solution Installing the Chassis Troubleshooting

78-10588-03 specifications

Cisco Systems 78-10588-03 is a robust and versatile networking device designed to enhance the efficiency and security of enterprise networks. This product is specifically engineered to meet the demands of modern digital communication, serving as a key component in a wide range of networking environments.

One of the main features of the Cisco 78-10588-03 is its emphasis on security. It integrates advanced security technologies that ensure the integrity of data and protect against unauthorized access. This device supports features such as virtual private networks (VPNs), intrusion prevention systems (IPS), and advanced malware protection, making it a vital tool for organizations concerned about cyber threats.

Another significant characteristic of the Cisco 78-10588-03 is its scalability. It is designed to accommodate the varying needs of businesses, from small enterprises to large multinational corporations. The device supports various network configurations and can easily be expanded as the organization grows. This flexibility allows businesses to adapt to changing demands without significant investment in new hardware.

The device also utilizes cutting-edge technologies to enhance performance. With support for high-speed connections, it ensures low latency and faster data transfer rates, which are crucial for real-time applications such as video conferencing and online collaboration. The Cisco 78-10588-03 uses Quality of Service (QoS) mechanisms to prioritize critical traffic, ensuring that important applications receive the necessary bandwidth.

Moreover, the Cisco 78-10588-03 is built with reliability in mind. It incorporates redundant components and supports failover features, which significantly reduces the risk of network downtime. This reliability is essential for organizations that cannot afford interruptions in their operations.

In terms of management, Cisco provides a user-friendly interface for monitoring and configuring the device. This interface simplifies the processes of troubleshooting and network management, allowing IT staff to respond quickly to issues as they arise.

In summary, the Cisco Systems 78-10588-03 is an essential networking device that combines advanced security features, scalability, high performance, reliability, and ease of management. It caters to the diverse needs of modern enterprises, making it a valuable addition to any organization's networking strategy. Its ability to adapt to the evolving landscape of digital communication positions it as a key player in the future of enterprise networking.