Chapter 3 Installing the Chassis
Cleaning the System
Table
Table
Region | Power Requirements |
|
|
North America | 110 to 120 VAC, 60 Hz or |
| |
|
|
Europe | 210 to 240 VAC, 50 Hz or |
| |
|
|
Grounding the Chassis
Connecting the power cords to the chassis provides basic grounding. You should also connect a separate grounding cable for each chassis to the rack. Use the ground contact on the right side of the chassis to make the grounding connection.
To ground the chassis, follow these steps:
Step 1 Connect a wire to the earth contact on the right side of the chassis.
Step 2 Connect the other end of the wire to the rack.
Cleaning the System
This section describes how to clean the chassis and the connectors and includes the following sections:
•Cleaning the Chassis
•Cleaning the Connectors
| Cisco Metro 1500 Series Hardware Installation Guide |