Graco 244561 important safety instructions Dispense Mode, Recipe Dispense

Page 29

Dispense Mode

Dispense Mode

Dispense Mode

Screen Navigation

Dispense Mode is used to dispense a fluid or recipe, check fluid dispense totals, and view the alarms log.

	RECIPE		DISPENSE	ID#


	Fluid 1		Fluid 2	Fluid 3
	Idle		Idle	Idle
Target	005.00 ltr		050.00 ltr	010.10 ltr
Actual	5.00 ltr		51.00 ltr	10.00 ltr
Tolerance %	5		5	5
Difference %	0		+2	-1

Recipe Dispense screen

Run

Totals

Alarms

3 screen selections

current screen

The name of the screen that is currently displayed is highlighted.

The Operator Station dispense switch must be set to AUTO to dispense using the controller.

AUTO

Press the left or right arrow keys on the keypad to move through the screens.

Press the up or down arrow keys to move through data fields on the Run screen.

309301G

29

Image 29

Contents ProDispense 309301G Part No Electronic Preset Dispense SystemContents Parts Water/Antifreeze Grease/Paint ProDispense System ComponentsMeterless ProDispense Controller Part NoDure ConventionsFIRE, EXPLOSION, and Electric Shock Hazard High Pressure Fluid HAZARD/SKIN Injection Hazard How the ProDispense System Works OverviewUsage Fluid SupplyDisplay and EasyKey Pad Main ComponentsProDispense Controller Number Keys Previous Field Display Remote Operator Stations Power Switch aOperation Mode Switch B and Key C Key Fluid Panels244599 244600 244601 246837 246838 246839 Key for FIG InstallationProDispense System Typical Installation Install the Fluid SuppliesConnect the Air and Fluid Lines Mount the Fluid PanelsFluid Panel 244599 Fluid Panel 244601Fluid Panel Install the Remote Operator StationMount the Controller Connect the Cables and Power Cord Check the Resistance Ground the SystemConnect a Printer optional Connect to a PC or Alarm optionalBefore Beginning Operation ProDispense Rev StartupShutdown Pressure Relief ProcedureTo enter Setup Mode Setup ModeTo exit Setup Mode Screen Navigation To setup the system System Setup ScreenFluid Panel Meter Type Factor Cc/pulse Fluid Setup ScreenTo set up the fluids To setup the recipes Recipe Setup ScreenCalibrate Meter Screen To calibrate a meterRecipe Dispense Dispense ModeRecipe Dispense Idle, Dispense, and Alarm StatusRun Screen Fluid Dispense Fluid DispenseFluid Totals Fluid Totals ScreenOut of Tolerance Alarm Alarm History ScreenDispense Timeout Alarm Invalid K-factor AlarmLoading Fluid Lines Operation ProceduresManual Dispense Automatic DispenseEmergency Stop Purging FluidProblem Cause Solution TroubleshootingTo remove controller ServiceRemoving and Installing Controller To install controller Replacing Display Board Replacing Membrane Replacing DisplayReplacing Main Board Replacing Power Supply Replacing Fluid Panel Junction Box Ti1404a Service Replacing Fluid Meter or Solenoid Servicing Fluid PanelTi1413a If replacing solenoid If replacing meterTi1412a If replacing dispense valve Servicing Fluid Panel 244601Replacing Fluid Meter, Solenoid, or Dispense Valve Show meter removal Replacing Solenoid or Dispense Valve Service 309301G Replacing Fluid Meter, Solenoid, or Dispense Valve Show meter removal Wire / Harness Connection Color Function Wiring ChartsControl Box Wiring Chart Color Function Wire / HarnessHarness Connection Color Function Fluid Panel Wiring ChartFluid panels Harness Connection Color Function Connector-Pin Accessories Wiring ChartField Wiring Chart Output Service 309301G Description Qty PartsPart No , Controller Item 18 Cover Assembly Part No , Fluid Panel Ti1322a 10, 11, 12 19, 23, 24 Ti1324a Part No , Fluid Panel Qty Description309301G Power Requirements Technical DataMeter-less Flow meter supplied by user Wetted Parts Accessories and KitsToll Free, 612-623-6921, 612-378-3505 Fax Graco Standard WarrantyGraco Information