Graco 244561 important safety instructions Graco Standard Warranty, Graco Information

Page 74

Graco Standard Warranty

Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco's written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Graco's sole obligation and buyer's sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.

Graco Information

For the latest information about Graco products, visit www.graco.com.

TO PLACE AN ORDER, contact your Graco distributor, or call to identify the nearest distributor:

1-800-328-0211 Toll Free, 612-623-6921, 612-378-3505 Fax

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

This manual contains English. MM 309301

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441

Copyright 2001, Graco Inc. is registered to ISO 9001

www.graco.com

Revised 11/2009

Page 73 Page 74
Image 74
Page 73 Page 74
Contents Part No Electronic Preset Dispense System ProDispense 309301GContents Parts Meterless ProDispense System ComponentsWater/Antifreeze Grease/Paint ProDispense Controller Part NoConventions DureFIRE, EXPLOSION, and Electric Shock Hazard High Pressure Fluid HAZARD/SKIN Injection Hazard Usage OverviewHow the ProDispense System Works Fluid SupplyDisplay and EasyKey Pad Main ComponentsProDispense Controller Number Keys Previous Field Display Remote Operator Stations Power Switch aOperation Mode Switch B and Key C Key Fluid Panels244599 244600 244601 246837 246838 246839 Installation Key for FIGInstall the Fluid Supplies ProDispense System Typical InstallationFluid Panel 244599 Mount the Fluid PanelsConnect the Air and Fluid Lines Fluid Panel 244601Install the Remote Operator Station Fluid PanelMount the Controller Connect the Cables and Power Cord Ground the System Check the ResistanceConnect to a PC or Alarm optional Connect a Printer optionalBefore Beginning Operation Startup ProDispense RevPressure Relief Procedure ShutdownTo exit Setup Mode Setup ModeTo enter Setup Mode Screen NavigationSystem Setup Screen To setup the systemFluid Panel Meter Type Factor Cc/pulse Fluid Setup ScreenTo set up the fluids Calibrate Meter Screen Recipe Setup ScreenTo setup the recipes To calibrate a meterDispense Mode Recipe DispenseRecipe Dispense Idle, Dispense, and Alarm StatusRun Screen Fluid Dispense Fluid DispenseFluid Totals Screen Fluid TotalsDispense Timeout Alarm Alarm History ScreenOut of Tolerance Alarm Invalid K-factor AlarmManual Dispense Operation ProceduresLoading Fluid Lines Automatic DispensePurging Fluid Emergency StopTroubleshooting Problem Cause SolutionTo remove controller ServiceRemoving and Installing Controller To install controller Replacing Display Board Replacing Display Replacing MembraneReplacing Main Board Replacing Power Supply Replacing Fluid Panel Junction Box Ti1404a Service Servicing Fluid Panel Replacing Fluid Meter or SolenoidTi1413a If replacing meter If replacing solenoidTi1412a If replacing dispense valve Servicing Fluid Panel 244601Replacing Fluid Meter, Solenoid, or Dispense Valve Show meter removal Replacing Solenoid or Dispense Valve Service 309301G Replacing Fluid Meter, Solenoid, or Dispense Valve Show meter removal Wire / Harness Connection Color Function Wiring ChartsControl Box Wiring Chart Wire / Harness Color FunctionFluid Panel Wiring Chart Harness Connection Color FunctionFluid panels Harness Connection Color Function Connector-Pin Accessories Wiring ChartField Wiring Chart Output Service 309301G Description Qty PartsPart No , Controller Item 18 Cover Assembly Part No , Fluid Panel Ti1322a 10, 11, 12 19, 23, 24 Ti1324a Part No , Fluid Panel Description Qty309301G Technical Data Power RequirementsMeter-less Flow meter supplied by user Accessories and Kits Wetted PartsToll Free, 612-623-6921, 612-378-3505 Fax Graco Standard WarrantyGraco Information

244561 specifications

The Graco 244561 is a highly regarded airless paint sprayer designed for both professional contractors and DIY enthusiasts. It is particularly known for its efficiency and versatility, making it suitable for a wide range of painting projects. This model offers several features that stand out in its class, ensuring that users achieve a high-quality finish with minimal effort.

One of the main features of the Graco 244561 is its powerful motor, which delivers consistent pressure for a smooth and even paint application. With a flow rate that can handle up to 0.42 gallons per minute, this sprayer is capable of quickly covering large areas, making it ideal for both interior and exterior projects. The robust design allows for the use of various paint types, including latex and oil-based finishes, giving users flexibility in their material choices.

The Graco 244561 also incorporates advanced technologies aimed at enhancing user experience and improving results. One of these is the Reverse-A-Clean feature, which enables users to easily clear clogs by reversing the flow of paint through the spray tip. This saves time and frustration, allowing users to get back to painting quickly. Additionally, the SmartControl technology ensures a consistent spray pattern at any pressure level, providing control over the finish and ensuring professional quality results.

The sprayer comes with a variety of accessories, including a spray tip that allows for different spray patterns and sizes. This ensures versatility in application, whether you are working on cabinets, walls, fences, or outdoor furniture. The adjustable pressure control also allows users to customize their spray settings based on the project, making it easier to work on intricate details or larger surfaces.

Durability is another key characteristic of the Graco 244561. Built with high-quality materials, this sprayer is designed to withstand the rigors of regular use in various environments. The compact and lightweight design also enhances portability, making it easy to transport from one job site to another.

In conclusion, the Graco 244561 airless paint sprayer is a powerful and versatile tool that caters to a wide array of painting needs. With its efficient motor, innovative technologies, and durable design, it promises excellent performance and reliability for both professionals and DIYers alike. Whether tackling a small home improvement project or a larger commercial job, the Graco 244561 stands out as a reliable choice that combines quality with user-friendliness.
Top Page Image Contents