Graco 244561 important safety instructions Troubleshooting, Problem Cause Solution

Page 36

Troubleshooting

Troubleshooting

Problem

Cause

Solution

 

 

 

 

 

 

Out of Tolerance Alarm

Dispense is under or over tolerance

Run screen shows tolerance difference for last

 

limit set for the fluid.

dispense. Use the value to determine whether

 

 

you should:

 

 

• Increase the tolerance value

 

 

• Model 244601 only — increase fluid flow

 

 

by further opening the dispense valve

 

 

(turn the t-handle clockwise).

 

 

• Increase or decrease fluid flow rate of the

 

 

fluid supply.

 

 

 

Dispense Timeout Alarm

The dispense did not complete within

Check the following:

 

set Dispense Timeout value.

• Fluid supply container is not empty.

 

 

 

 

• Fluid supply equipment is not faulty.

 

 

• Fluid flow rate is sufficient.

 

 

• Timeout value is too low and needs

 

 

increase.

 

 

• Fluid line is not clogged.

 

 

• Solenoids are operating.

 

 

• Model 244601 only — solenoid is receiv-

 

 

ing air and dispense valve is open.

 

 

• Cables are properly connected.

 

 

• Meters are operating and communicating

 

 

with controller.

 

 

• Dispense valves are operating.

 

 

Service equipment as needed.

 

 

 

Invalid K-factor Alarm

Meter K-factor is set to zero (00.000).

Set valid meter K-factor (page 27).

 

 

 

Memory Failure Alarm

The system is not configured.

Enter setup values (page 25).

 

 

 

 

The memory is corrupt.

Replace flash EPROM.

 

 

 

No display

No power

Turn on or reconnect power.

 

 

 

 

Faulty cable(s)

Replace cable(s).

 

 

 

 

Blown fuse(s)

Replace fuse(s).

 

 

 

36

309301G

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Part No Electronic Preset Dispense System ProDispense 309301GContents Parts ProDispense System Components Water/Antifreeze Grease/PaintMeterless ProDispense Controller Part NoConventions DureFIRE, EXPLOSION, and Electric Shock Hazard High Pressure Fluid HAZARD/SKIN Injection Hazard Overview How the ProDispense System WorksUsage Fluid SupplyMain Components ProDispense ControllerDisplay and EasyKey Pad Number Keys Previous Field Display Power Switch a Operation Mode Switch B and Key CRemote Operator Stations Fluid Panels 244599 244600 244601Key 246837 246838 246839 Installation Key for FIGInstall the Fluid Supplies ProDispense System Typical InstallationMount the Fluid Panels Connect the Air and Fluid LinesFluid Panel 244599 Fluid Panel 244601Install the Remote Operator Station Fluid PanelMount the Controller Connect the Cables and Power Cord Ground the System Check the ResistanceConnect to a PC or Alarm optional Connect a Printer optionalBefore Beginning Operation Startup ProDispense RevPressure Relief Procedure ShutdownSetup Mode To enter Setup ModeTo exit Setup Mode Screen NavigationSystem Setup Screen To setup the systemFluid Setup Screen To set up the fluidsFluid Panel Meter Type Factor Cc/pulse Recipe Setup Screen To setup the recipesCalibrate Meter Screen To calibrate a meterDispense Mode Recipe DispenseIdle, Dispense, and Alarm Status Run ScreenRecipe Dispense Fluid Dispense Fluid DispenseFluid Totals Screen Fluid TotalsAlarm History Screen Out of Tolerance AlarmDispense Timeout Alarm Invalid K-factor AlarmOperation Procedures Loading Fluid LinesManual Dispense Automatic DispensePurging Fluid Emergency StopTroubleshooting Problem Cause SolutionService Removing and Installing ControllerTo remove controller To install controller Replacing Display Board Replacing Display Replacing MembraneReplacing Main Board Replacing Power Supply Replacing Fluid Panel Junction Box Ti1404a Service Servicing Fluid Panel Replacing Fluid Meter or SolenoidTi1413a If replacing meter If replacing solenoidTi1412a Servicing Fluid Panel 244601 Replacing Fluid Meter, Solenoid, or Dispense ValveIf replacing dispense valve Show meter removal Replacing Solenoid or Dispense Valve Service 309301G Replacing Fluid Meter, Solenoid, or Dispense Valve Show meter removal Wiring Charts Control Box Wiring ChartWire / Harness Connection Color Function Wire / Harness Color FunctionFluid Panel Wiring Chart Harness Connection Color FunctionFluid panels Accessories Wiring Chart Field Wiring Chart OutputHarness Connection Color Function Connector-Pin Service 309301G Parts Part No , ControllerDescription Qty Item 18 Cover Assembly Part No , Fluid Panel Ti1322a 10, 11, 12 19, 23, 24 Ti1324a Part No , Fluid Panel Description Qty309301G Technical Data Power RequirementsMeter-less Flow meter supplied by user Accessories and Kits Wetted PartsGraco Standard Warranty Graco InformationToll Free, 612-623-6921, 612-378-3505 Fax

244561 specifications

The Graco 244561 is a highly regarded airless paint sprayer designed for both professional contractors and DIY enthusiasts. It is particularly known for its efficiency and versatility, making it suitable for a wide range of painting projects. This model offers several features that stand out in its class, ensuring that users achieve a high-quality finish with minimal effort.

One of the main features of the Graco 244561 is its powerful motor, which delivers consistent pressure for a smooth and even paint application. With a flow rate that can handle up to 0.42 gallons per minute, this sprayer is capable of quickly covering large areas, making it ideal for both interior and exterior projects. The robust design allows for the use of various paint types, including latex and oil-based finishes, giving users flexibility in their material choices.

The Graco 244561 also incorporates advanced technologies aimed at enhancing user experience and improving results. One of these is the Reverse-A-Clean feature, which enables users to easily clear clogs by reversing the flow of paint through the spray tip. This saves time and frustration, allowing users to get back to painting quickly. Additionally, the SmartControl technology ensures a consistent spray pattern at any pressure level, providing control over the finish and ensuring professional quality results.

The sprayer comes with a variety of accessories, including a spray tip that allows for different spray patterns and sizes. This ensures versatility in application, whether you are working on cabinets, walls, fences, or outdoor furniture. The adjustable pressure control also allows users to customize their spray settings based on the project, making it easier to work on intricate details or larger surfaces.

Durability is another key characteristic of the Graco 244561. Built with high-quality materials, this sprayer is designed to withstand the rigors of regular use in various environments. The compact and lightweight design also enhances portability, making it easy to transport from one job site to another.

In conclusion, the Graco 244561 airless paint sprayer is a powerful and versatile tool that caters to a wide array of painting needs. With its efficient motor, innovative technologies, and durable design, it promises excellent performance and reliability for both professionals and DIYers alike. Whether tackling a small home improvement project or a larger commercial job, the Graco 244561 stands out as a reliable choice that combines quality with user-friendliness.
Top Page Image Contents