ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
parts@staminaproducts.com
STEP 1
Insert REAR STABILIZER(3) into the MAIN FRAME(1) and fasten with BOLTS(M8 x 15mm)(60).
STEP 2
Attach FRONT STABILIZER(2) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8 x 65mm) (58), WASHERS(M8)(75), and ACORN NUTS(M8)(69).
STEP 3
Turn the LEVELING CAPS(55) on the REAR STABILIZER(3) as needed until bike is steady and not rocking.
STEP 4
Attach the SEAT(48) to the SEAT POST(4) with NYLOCK NUTS(M8)(68) and WASHERS(M8)(75). Slide BELLOWS(50) over the SEAT POST(4). Insert the SEAT POST(4) into the MAIN FRAME(1) and lock in position with LOCKING KNOB(51).
6