Stamina Products 890 owner manual Assembly Instructions

Page 7

ASSEMBLY INSTRUCTIONS

R

R

STEP 5

Slide the AXLE(42) through BUSHINGS(43) into the MAIN FRAME(1). Align the holes on the AXLE(42) and the MAIN FRAME(1). Lock the AXLE(42) in position with the BRACKET(52) and SCREW (M5 x 15mm)(63).

STEP 6

There is a "R" decal on the RIGHT HANDLEBAR(6) and RIGHT LOWER BAR ASSEMBLY. Attach the LOWER BAR(7) to the RIGHT HANDLEBAR(6) with BOLTS(M6 x 15mm)(59) and ARC WASHERS(M6)(76). Repeat to assemble the LEFT HANDLEBAR(5).

STEP 7

Slide LEFT and RIGHT HANDLEBARS(5, 6), with PIVOT TUBE to REAR and GRIPS facing outside, onto AXLE(42) and fasten with LARGE WASHERS(M8)(44) and NYLOCK NUTS(M8)(68). Place a NUT CAP(45) onto the NYLOCK NUT(M8)(68) on both sides.

7

Image 7
Contents 15-0890 Weight on this product should not exceed 250 lbsCustomer Service Number 800 This Product is Produced Exclusively bySafety Precautions Table of ContentsThank YOU for Purchasing the 0890 Air Bike Air Bike Before YOU BeginMillimeters Hardware IllustrationsStep Assembly InstructionsAssembly Instructions Before Attaching Pedals and Connecting Linkages Assembly Instructions Trouble Shooting Guide MaintenanceStorage Remove the FAN17 and Wire CAGES31, 32 from the Bike Adjustment InstructionsChain Adjustment Fan AdjustmentTighten Acorn NUTS3/870 BearingFunction Using The MonitorUsage Information Seat HeightStationary Handlebar Load AdjustmentCONNECTOR39 Exercise WorkoutExercise Intensity Conditioning GuidelinesSuggested Stretching Exercises WARM-UP and COOL-DOWNLimited Warranty WarrantyModel Front Product Parts DrawingDIAGRAM# Part Name QTY Parts ListParts List Page Description Quantity FAX/MAIL Ordering Form