ASSEMBLY
End of Steering Column
Lock Nut
10 |
•Fit the remaining lock nut onto the end of the steering column.
•Tighten the lock nut with the assembly tool.
Seat Belt
Fasteners
Folded Tab
Folded Tab
Folded End | Folded End |
|
12
•Position both seat belts so that the fasteners face each other, as shown.
•Fit the folded end of each short seat belt down through the outer slots in the seat. Do not insert the folded tab into the slot. Pull up on each seat belt to make sure it is secure.
Steering
Wheel Cap
11
•“Snap” the steering wheel cap into the center of the steering wheel.
B
A
13 | SIDE VIEW |
|
•First, “snap” the front of the seat to the vehicle A .
•Next, “snap” the four tabs near the back of the seat into the matching slots in the vehicle B .
10 | |
|
|