Disney owner manual With Assembly Instructions, For Model R2510T3260

Page 1

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Phillips

Screwdriver, Slotted Screwdriver and

Hammer (both not included) and

Assembly Tool (included).

Use only with a Power Wheels® 6 Volt

(4.0 Amp/Hr.) Rechargeable Battery with Built-in Thermal Fuse and a Power Wheels®

6 Volt (4.0 Amp/Hr.) Charger (both included).

Owner's Manual

with Assembly Instructions

Product features may vary from the picture above.

Image 1

Contents For Model R2510T3260 With Assembly InstructionsImportant Information Table of ContentsElectrical Hazard Parts Parts Picture Turn Signal Seat Belt Volt Charger Assembly Tool Dash Key#8 x ¾ Screw Please call Battery ChargingCharger ConnectorBattery Battery Charging AssemblyDash Key Insert two #8 x ¾ screws Dash Wire ConnectorStraight into the dash, as Shown. Tighten the screws Steering ColumnMotor Harness Connector Steering Wheel Steering Wheel Wire with Connector Turn SignalLock Nut End of Steering Column Steering Linkage Steering Column CoverSeat Belt Fasteners Folded Tab Folded End End of Steering Column Lock NutLimited Warranty Assembly Vehicle CareHandle Latch Decoration Battery Connector Battery Retainer Battery InstallationCare Battery Care and DisposalSafe Driving Rules Teach Safety Rules to ChildrenStage 1 Parent Assisted Vehicle OperationProblem Possible Cause Solution Problems and Solutions GuideThermal fuse. Do not substitute parts More than one rider at one time, exceeding the 40 lb Before first-time use You must charge the battery Hours