Fisher-Price B3002, B0323 Fit the toy bar plugs into the sockets on the swing tubes

Page 10

Assembly

Elastic

Loop

Elastic

Loop

25

Fit the bottom edge of the pad around the bottom edge of the seat.

Hook the elastic loops on each side of the pad to the peg on the back of the accessory bins.

Hub

3.5mm x 1.25cm Screw - 4

Shown Actual Size

Plug

Toybar

Plug

Plug

Socket

26

• Fit the toy bar plugs into the sockets on the swing tubes.

Hint: If the toybar plugs do not fit into the sockets, turn the toybar around. Now, fit the plugs into the sockets.

Insert two 3.5mm x 1.25cm screws through each plug and into each socket. Tighten the screws with a Phillips screw- driver. Do not overtighten.

10

Image 10
Contents Quick Response Swing Model Number B0323, B3002Consumer Information Parts Assembly Push to snap the top of the remote under the holder clips Set the frame assembly aside for Assembly step Fit the grooves on the bracket to the seat tubes, as shown Press to snap the seat wire caps into place Frame Hub Push Button Swing Tube Front Seat Curved Base Fit the toy bar plugs into the sockets on the swing tubes Battery Installation Battery TipsTo tighten the restraint Securing Your ChildTo loosen the restraint Upright, Semi-Recline or Recline To adjust the seat angle Adjusting the SeatTray Swinging To onTo remove the pad Storage CareTo replace the pad For Best Results FCC Statement United States Only