Assembly
Pull |
|
Rear |
|
Leg | Pull |
| Rear |
| Leg |
Pull Up |
Pull Up
Rear Legs
9
• Pull both rear legs out until they “snap” into place.
11 | Rear Base |
•While standing on the rear base, pull the rear legs up. They should remain secured to the rear base. If you can remove the rear legs, you have not assembled them cor- rectly to the rear base. Reread and repeat assembly step 10.
•Set the frame assembly aside for Assembly step 21.
Rear | Seat Tube | |
Long Ends | ||
Legs |
Press 
Button
Press
Button
10 Front | Rear Base |
Base |
|
•Place the rear base on a flat surface so that the buttons face the front base.
•While pressing the buttons on each side of the rear base, fit the rear legs onto the rear base. Push the rear legs down until the buttons on the rear base “snap” into the holes in each rear leg.
Ridges
12
Top of Seat | Curved | |
End | ||
|
• Position the seat face down, with the top of the seat facing you.
•Position a seat tube so that the long
end is upright and toward you and the curved end is toward the outside edge of the seat.
•Insert the curved end of the seat tube through the holes in the ridges on the seat back.
•Repeat this procedure to assemble the other seat tube to
6 the seat.