Sterling Plumbing CV3-635, 882.00252.00 Configurable Settings, Options for Station Setup

Page 43

Chapter 6: Configurable Settings

This section describes the proper setup of the 3 pump, 33-station control system parameters. These parameters are operator changeable; however, these items should require setup only during the initial installation. Only authorized personnel should change them.

Many of the variables and setup parameters have been preset at the factory and do not need to be changed. However, this section of the manual will address all of the setup parameters that were available at the time of printing. The purpose of this is to familiarize the reader with all the setup parameters and their usage.

6-1 Options for Station Setup

Name

Description

Options

Default

Conveying Options

 

 

 

Convey time

Length of time the station’s vacuum valve remains

1–999 sec.

30 sec.

 

open to allow material to be drawn in. (For a

 

 

 

volume-fill station, the valve closes when material

 

 

 

covers the station’s volume-fill proximity sensor or

 

 

 

this time elapses, whichever comes first.)

 

 

 

Adjust this value to match the actual time needed

 

 

 

to fill the station.

 

 

(Last convey time)

Display only. Length of time the station’s vacuum

 

 

 

valve was open for receiving material during the

 

 

 

most recent convey. This information is displayed

—

—

 

for your reference when adjusting convey time and

 

 

 

dump delay.

 

 

Dump delay

Length of time allowed for material to drain from

1–99 sec.

15 sec.

 

the station into the receiver. The controller will not

 

 

 

attempt to deliver more material to the station until

 

 

 

this time has elapsed.

 

 

 

Adjust this value to match the actual time needed

 

 

 

to drain the station. If it is set too short, the

 

 

 

controller may attempt to refill the station before it

 

 

 

is empty, causing material to back up and/or

 

 

 

underusing the station’s capacity. If it is set too

 

 

 

long, the system may be unable to keep up with

 

 

 

your equipment’s demand for material.

 

 

Assigned to pump n

Number (address) of the pump to which this

0–3 (0 = not

0

 

station’s vacuum line is connected.

assigned)

 

Special convey

When this option is enabled, the station’s vacuum

disabled,

disabled

 

valve remains open for the convey time, even if

enabled

 

 

the station is not demanding material and is

 

 

 

indicating that it is full. When disabled, the

 

 

 

station’s vacuum valve opens when there is

 

 

 

demand from the station, and it remains open until

 

 

 

the convey time has elapsed or material trips the

 

 

 

volume-fill proximity switch.

 

 

 

Enable this option if and only if the station has no

 

 

 

flapper.

 

 

3–Pump 33-Station Controllers

Chapter 6: Configurable Settings

42 of 51

Page 42 Page 44
Image 43
Page 42 Page 44
Contents SCC 3-Pump 33-Station Controllers Parts and Service Department Shipping Information Table of Contents Maintenance Configurable Settings Contract Department How to Use This Manual SafetySafety Symbols Used in this Manual Wear Safety Glasses and Work Gloves General Responsibility ResponsibilityReporting a Safety Defect Maintenance ResponsibilityOperator Responsibility Models Covered in This Manual Functional DescriptionGeneral Description Electrical Features Standard FeaturesOptional Features Mechanical FeaturesFail Safe Operation Safety Devices and InterlocksSafety Circuit Standards Safety Device Lock-OutsMounting the Control Panel InstallationMaking Control Panel Power Drop Wiring Connections UncratingConnecting the Control Panel to the Pump Package Connecting the Control Panel to Vacuum HoppersSetting the Number of Stations and the Number of Pumps SetupSystem Setup Screen Before Setup System Setup Screen Setting Up Alarm SilencesSetting Up Touch Switch Delay Setting Up Pump StagingSetting Up a Single Station Setting Up StationsStation Setup Screen Station Copy Screen Copying Settings from One Station to OthersPage Setting Up a Single Pump Setting Up PumpsPump Copy Screen Copying Settings from One Pump to OthersSetup Password Finishing Setup Setting Up PasswordsOperator Password Initial Startup Reviewing Station Status OperationOverview Basic TasksColor Label Description Pump Status Screen During Operation Reviewing Pump StatusLogging On and Logging Off Password Entry ScreenStarting and Stopping the System Enabling and Disabling Stations and PumpsNavigating among the Station Operator Screens Reviewing and Adjusting Basic Station SettingsAdjusting Convey Time and Dump Delay Activating and Stopping Priority Convey for a Station Reviewing and Resetting a Pump Hour Meter Adjusting Advanced SettingsTransfer To Standby Pump Screen Transferring Stations to a Standby PumpTransfer To Standby Pump Button Standby Pump Errors AlarmsReviewing Alarms Silencing Alarms Maintenance Options for Station Setup Configurable Settings# attempts before Idle Time Options Options for Pump SetupGeneral Troubleshooting TroubleshootingPump Alarms Station AlarmsSystem Alarms Appendix WarrantyOptional Components Pump 33 station Controller with 6 Display Drawings and DiagramsDC Voltage Spare Parts ListReturned Material Policy AC VoltageController Identification Serial Number Tag Safety Tag InformationWarranty Returns Controller Safety TagsSales Department Service DepartmentTechnical Assistance Contact Information Parts Department

882.00252.00, CV3-635 specifications

The Sterling Plumbing CV3-635,882.00252.00 is a revolutionary addition to home plumbing solutions, designed to enhance efficiency and convenience. This model stands out in the market due to its innovative features, advanced technologies, and sturdy characteristics, making it a reliable choice for homeowners and professionals alike.

One of the main features of the CV3-635 is its high water efficiency. Engineered to reduce water consumption without sacrificing performance, this plumbing fixture is ideal for environmentally conscious users. It is designed to meet or exceed regulatory standards for water flow, ensuring optimal operation while helping to conserve precious resources.

The CV3-635 also incorporates state-of-the-art technology, including SmartFlow technology, which allows for precise water temperature control. This feature ensures that users can enjoy consistent and comfortable water temperatures, eliminating the risk of sudden temperature fluctuations. With a user-friendly interface, adjustments can be made easily, accommodating the needs of every member of the household.

Durability is a key characteristic of the Sterling Plumbing CV3-635,882.00252.00. Constructed with high-quality materials, it resists leaks and corrosion, ensuring a long lifespan. The polished chrome finish not only enhances its aesthetic appeal but also provides added protection against wear and tear, making it a stylish yet practical addition to any bathroom or kitchen.

Installation of the CV3-635 is straightforward, thanks to its user-friendly design. This model is compatible with standard plumbing configurations, allowing for quick setup and minimal disruption. The comprehensive installation guide that accompanies the product ensures that even less experienced users can install it with confidence.

Another notable feature is its noise-reduction technology, which minimizes operational sounds, creating a quieter environment in the home. This is particularly beneficial in multi-story houses where plumbing sounds can disturb lower levels.

The Sterling Plumbing CV3-635,882.00252.00 is not just a plumbing fixture; it is a commitment to sustainability, performance, and style. With its innovative features, advanced technologies, and robust construction, it stands as a premium choice in modern plumbing solutions, appealing to both eco-conscious consumers and design-savvy homeowners.
Top Page Image Contents