Battery Installation

+	1,5V	–
	LR20 (“D”)

Shown Actual Size

Battery Compartment

•Locate the battery compartment on the bottom of the vibrations unit.

•Loosen the screw in the battery compartment door with a Phillips screwdriver.

•Lift to remove the battery compartment door.

•Insert one LR20 ("D") alkaline battery as indicated inside the battery compartment.

Hint: We recommend using alkaline batteries for longer battery life.

•Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.