10BASIC OPERATION
Baby alert!
You can set your Parent Unit to give an extra warning "beep" when the noise levels in your baby's room is high and the red lights on the sound sensor are lit. This is particularly useful if the volume of your Parent Unit is turned down and you are just using the sensor lights to monitor the noise levels in your baby's room.
Follow the "Sound Alert setting" on the menu setting section to set the Sound Alert on or off, and adjust the alert volume.
Paging
If the Parent Unit is misplaced, you can use [ 
] button on the Baby Unit to locate the Parent Unit.
•Press and hold [ 
] for 2 seconds on the Baby Unit. The Parent Unit will automatically reset to mid volume and the paging alert will sound.
•To stop the Page alert, press any button on the Parent Unit, or press [ 
] again on the Baby Unit.
Note:
If no button is pressed, the paging tone will stop after 2 minutes.
If the Parent Unit volume is off, the Parent Unit volume will reset to
Night light
The Baby Unit has a night light which emits a soft starry glow, providing comfort and reassurance for your baby and allowing you to see them in a darkened room.
On the baby unit
Press [ 
] key on the top of the baby unit. A soft light will turn on gently. Press again and the light will fade away.
On the parent unit
Press [ 
] key and use [ 
/
] keys to select "Night Light", then press [ OK ] key to turn on or off the night light.
Lullaby
Your baby can be soothed to sleep by a gentle lullaby from the Baby Unit. There are 5 tunes to choose from. The lullaby feature can be turned on and off from both the Baby Unit and the Parent Unit and is indicated on both by a musical note icon. The icon and the lullaby title show on both Displays when the lullaby is playing. The lullabies will play for 15 minutes. We recommend that you use the lullaby setting at the lowest volume setting which comforts your baby.
On the Baby Unit
1. Press [ 
] key. The lullaby is shown on the display.