Oricom 200 manual Battery requirements, Cleaning and care

Page 4

2WARNINGS AND SAFETY INFORMATION

Battery requirements

Each parent unit requires two rechargeable Ni-MH batteries, size AAA 1.2V 800mAh (HR10/44).

Do not dispose of the batteries in a fire, as they can explode.

Do not open, unscrew or temper with any of your baby monitor units or battery. Always carry out repairs through your authorised ORICOM representative or other duly qualified tradesperson.

Released electrolyte from the battery is corrosive and can cause damage to the eyes or skin. It can be toxic and fatal if swallowed. If there is any sign of poisoning, immediately call emergency 000.

When your Baby Monitor is not in use, it is recom- mended that you disconnect it from the mains supply and remove the batteries.

Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion and in turn harm or even death.

The Ni-MH batteries supplied with this product may be able to be recycled once they are unable to recharge during normal operation. Always observe your local Council /State regulations regarding the disposal of your packaging materials, exhausted batteries, and old equipment.

Always recycle where possible. Do not use your baby monitor in an explosive hazard area such as where there is gas leaking.

As there is a slight chance that the product could be damaged by an electrical storm, it is recommended that users unplug from the mains supply during an electrical storm.

Cleaning and care

The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents. Apart from occasional cleaning of the case, no other care is necessary.

Image 4
Contents Baby Monitor Table of Contents Power requirements Battery requirements Cleaning and carePack Contents InstallationGetting Started For the Baby Unit Your Baby Monitor Baby unit SenderBelt Clip Volume Up/Down Keys Left view of baby unitParent unit Receiver 11 DC 6V inputCharger Pod Link LightTalk key Charging LightBaby Unit LCD Display of Baby MonitorParent Unit Power On/Off Adjusting VolumeBasic Operation MonitoringBaby alert PagingNight light LullabyClock TemperatureTime for a Feed Low Battery Talk to your BabyOut of Range TorchCharging the Battery Menu Settings Night light SettingLullaby Setting Sensitivity SettingSound Alert Setting Temperature SettingAdjust Volume Set On or OffClock Setting Set desired baby room temperature rangeSet temperature alert Set temperature alert volumeSet the time Feed Time SettingSet the hour format Language Setting Set Alarm on or offSet Alarm Volume Set the first or next feed timeTroubleshooting Problem Possible causesProduct Specifications Feature SpecificationsGuarantee Warranty AustraliaAustralia Customer Support