Getting Started, Installation, Pack Contents

GETTING STARTED 3

Thank you for choosing this monitor from Oricom.

Installation

Your Secure 200 Baby Monitor offers the best Digital Technology.

INTERFERENCE

FREE FREQUENCY

DECT (Digital Enhanced Cordless Telecommunications) is the most widely used worldwide digital cordless technology, offering amazingly clear sound, long range and maximum voice security.

DECT operates on the 1.8Ghz frequency which eliminates potential interference from other common wireless devices such as cordless telephones, wireless networks (Wi-Fi), Bluetooth and cordless computer devices.

For the Parent Unit

1.Remove the Belt Clip by lifting the clip at the top and sliding it downwards.

2.Then remove the battery cover on the back of the Parent Unit by pressing and sliding it down. Insert the rechargeable batteries (supplied) as marked on the unit and close the cover again.

clip

battery cover

Pack Contents

•Parent unit (receiver)

•Baby unit (sender)

•Mains adaptor with charger pod

•2 x NiMH rechargeable batteries (type AAA, 800mAh)

•Mains adaptor with power cord

3.Place the Parent Unit into the Charger Pod.

4.Plug the mains adaptor into a mains power socket.

The red charger light on the charger pod will illuminate indicating that the Parent Unit is charging.

(the light will remain on to ensure optimum charge is maintained).

WARNING

!DO NOT USE STANDARD/ALKALINE BATTERIES IN THE PARENT UNIT, AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-MH RECHARGEABLE BATTERIES AS SUPPLIED.