1.Press [ 
] key on the parent unit and use [ 
/
] keys to select "Sensitivity". The display is shown below:
2.Press [ OK ] key and then use [ 
/
] keys to select the sensitivity level. There are 5 levels.
3.Press [ OK ] key to confirm and "Saved" is shown on the display.
Sound Alert Setting
You can set the sound alert of the parent unit on or off, and also the volume of the sound alert.
Press [ 
] key on the parent unit and use [ 
/
] keys to select "Sound Alert". The display is shown below:
MENU SETTINGS 15
Set On or Off
1.Press [ OK ] key, "On?" or "Off?" is shown on the display, press [ OK ] key to select Sound Alert on or off and "Saved" will be displayed on the parent unit.
Adjust Volume
2.In the Sound Alert setting menu, use [ 
/
] keys to select "Volume" and press [ OK ] key.
3.Use [ 
/
] keys to select the volume level. There are 5 volume levels.
4.Press [ OK ] key to confirm and "Saved" will be shown on the display.
Temperature Setting
You can monitor the temperature in the baby's room on both the parent and baby unit.
You can select the baby room temperature alert range. The lower limit can be set from 18°C to 25°C and the upper limit from 19°C to 26°C. If selected an alert on the parent unit will sound and the display will flash if the room temperature falls outside the selected range.
Please note the baby monitor cannot manipulate the temperature in your baby’s room, it only provides a temperature reading.