12BASIC OPERATION
Talk to your Baby
You can speak to your baby from the Parent Unit, perhaps to reassure them that you are on your way.
Press and hold [ 
] key and speak into the front of the Parent Unit.
•Please note that you will not be able to hear your baby while you are speaking to them until you release [ 
] key again.
Customize your Baby Monitor to your Baby
Some babies are louder than others! You can customize the sound sensitivity of your Baby Monitor to suit your baby. Set the sensitivity "High" for a quiet sleeper with a soft cry and set to "Low" sensitivity if they tend to make noise when sleeping or can make quite loud noises before they are truly crying.
Follow the "Sensitivity Setting" on Menu Settings to set the sensitivity.
Out of Range
When the baby and parent units have no link with each other (eg. Out of range, parent unit or Baby unit is not powered on), the green Link light flashes. The link break alert will be heard from the Parent Unit every 30 seconds, and "no link"
will be shown on both units LCD display. When the units are linked, the green Link light will be steadily lit.
Torch
The Parent Unit has a useful Torch feature. Press and hold the button on the parent unit, a soft beam of light is emitted from the top of the Parent Unit. It is helpful when peeping into a darkened room to check on your baby.
Low Battery
Baby Unit
When the battery power is low, the battery icon on the display will flash.
Parent Unit
When the batteries are low, the battery icon on the display will flash. And also the low battery alert tone will sound. The unit still can be used for 30 minutes. You should put the parent unit on the charger pod to recharge the batteries.
Note:
Low battery alert can be suppressed by pressing any button.