Setup, AC Adaptor Jack | Fisher-Price 71592 manual

SETUP

For your convenience, the channel and code switches on the transmitter and receiver have been pre-set at Fisher-Price®.

IMPORTANT! To prevent entanglement, never place the transmitter in a crib or playpen.

Place the transmitter, receiver and AC adaptor cord(s) out of baby’s reach.

Antenna

AC Adaptor

Channel Switch

Socket	Socket

AC Adaptor Jack

TRANSMITTER

RECEIVER

•Decide whether you will use the AC adaptor or batteries to power the transmitter/receiver. If you will be using either unit near an outlet, we recommend using the AC adaptor(s).

•Place the transmitter in the same room with your child. For best sound pick-up, point the microphone directly toward the crib or play area. Make sure the antenna points upward for best transmission.

•For best transmission, unwrap and fully extend the AC adaptor cord. Insert the AC adaptor jack into the transmitter socket. Insert the plug into a standard wall outlet.

•Place the receiver where you can hear/see it. Or, wear the receiver using the convenient belt clip. Make sure the antenna points upward for best reception.

•For best reception, unwrap and fully extend the AC adaptor cord. Insert the AC adaptor jack into the receiver socket. Insert the plug into a standard wall outlet.

•Check to be sure the channel switch on both the receiver and the transmitter are on the same channel.