CHECKING PRIVACY
Channel Switch
Power Switch
Power Indicator
Power Indicator
Signal
Indicator
Power/Volume Dial
RECEIVER
•Rotate the power/volume dial on the receiver to the ON position. The power indicator lights.
•Make sure the power switch on the front of the transmitter is in the OFF position. The power indicator should NOT light.
•Look at the signal indicator on the receiver. It should NOT light.
•Change the channel switch on the receiver to the other channel.
•Look at the signal indicator on the receiver. It should NOT light. If the signal indicator does NOT light on either channel (with the transmitter power OFF), the privacy feature on your Direct Link Privacy Monitor™ is working.
TRANSMITTER
•
IMPORTANT! If the signal indicator lights on either channel (with the transmitter power OFF), you need to reset your scrambled code. Please see Resetting Your Scrambled Code, page 8.
6