USE
|
|
| Power Switch | ||
Power Indicator |
|
| Channel | ||
|
| Switch | |||
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TRANSMITTER
•Slide the power switch on the front of the transmitter to the ON position. The power indicator lights.
•Rotate the Power/Volume dial on the receiver to the “ON” position. The power indicator lights.
•Check to be sure the signal indicator on the receiver lights. If the signal indicator on the receiver does not light, you need to reset your scrambled code. Please see Resetting Your Scrambled Code, page 8.
•Adjust the volume to a comfortable level on the receiver.
Channel Switch
Power | Variable Lights | |
Indicator | ||
Display | ||
| ||
| Power/ | |
| Volume Dial | |
Signal |
| |
Indicator |
|
RECEIVER
•The variable lights display will light when sound is received by the receiver.
•If all five bars in the variable lights display light and there is a high level of static:
–The receiver power is ON and the transmitter power is OFF. (Turn the transmitter power ON.)
–The receiver is out of range of the transmitter. (Move the receiver closer to the transmitter.)
–The receiver and the transmitter are not on the same channel. (Set the channel switches on the transmitter and receiver to the same channel.)
–Loud sounds are transmitting.
Note: The variable lights display will not light if the battery is weak, even though you may still hear sounds. Replace the battery with a fresh 9V alkaline battery, or use the AC adaptor that came with this product.
•To further enhance the privacy of your home, be sure to turn the transmitter and receiver OFF when not in use.
7