Chauvet 3P user manual Control Panel Functions, Setting the DMX address, Down, Exit

Operating Instructions

Setting the DMX address

Each fixture requires a "start address" from 1 to 244. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the channels used do not overlap and note the start address selected for future reference. The COLORado™ 3 uses 12 channels of DMX. If this is your first time using DMX, we recommend reading the DMX Primer in the Appendix Section.

Control Panel Functions

All fixture functions and settings are accessible via the built in control panel interface.

SET UP DOWN EXIT

BUTTON	FUNCTION
SET	Enables the currently displayed menu or sets the currently selected value in to the
	selected function
UP	Navigates upwards through the menu list and increases the numeric value when in a
	function
DOWN	Navigates downwards through the menu list and decreases the numeric value when
	in a function
EXIT	Exits from the current menu or function

COLORado™ 3P User Manual 17 3/17/2009 9:54 AM