5.COLORado™ Controller
Overview
Setup
LCD Display Panel
Sold
Separately
MODE SETUP UP DOWN
MODE Accesses main menu or backs out of
SETUP Selects the currently displayed menu or confirms the current function value
UP Use to navigate upwards through menu items or increment function values
DOWN Use to navigate downwards through menu items or decrement function values
Connect from the OUT on the controller to the DMX Input side of the COLORado™ using a DMX XLR cable. Visit the section titled: Setting up a DMX Serial Data Link on Page 13.
It is recommended that you power up all COLORado units connected prior to turning on the controller. This ensures that the controller will
Alternatively you can use {Detect device} from the {Settings} menu.
Set ID addresses on the COLORados in ascending order.
Set the {Range} in the {Settings} menu.
Note | There is no need to set ID and Range for {Wash} programs. |
COLORado™ 3 User Manual | 28 |