Quinny CV078 manual Canopy, To Remove Front Bar, 10a, 10c

Assembly

9 Canopy
	9

Remove inserts before installing canopy (Figure 9).

10Front Bar

Remove insert on seat from underneath as shown by pushing on depression underneath (Figure 10). Slide front bar into place until it clicks. Attach elastic underneath seat as shown (Figure 10a).

To Remove Front Bar

Align tabs to rails on each side of seat and slide down into place (Figure 9a).

Unsnap and pull back top of seat fabric. Line up tab on top of canopy with top of seat and slide into place until it clicks (Figure 9b).

NOTE: Once canopy is fully attached re-attach the seat pad.

9a

Unhook elastic under seat. Push depression under seat and slide front bar out (Figure 10b). Replace with front insert (Figure 10c).

9b

10a	10b
	10c

5