Quinny CV078 manual Assembly

Assembly

1 Install Rear Wheels 1

Slide the rear wheel axle into the frame until you hear a “click” (Figure 1). Repeat for other rear wheel. Pull to confirm each is assembled securely.

4Unfold Stroller

Unfasten transport strap (Figure 4).

Push back on frame lock to release and gently pull up on frame from handlebar (Figure 4a).

Frame will begin to unfold automatically and click into place (Figure 4b).

4

4a

2Attach Shopping Basket

Slide basket onto frame tube through opening (Figure 2) then slide tab into tube at the front center (Figure 2a).

Secure hook-and-loop strap around frame above each rear wheel (Figure 2b).

2

2a

2b

NOTE: The Moodd stroller frame has a unique mechanism that enables the automatic unfolding of the frame. The temperature can affect the functioning of this mechanism. In cold or frosty weather, the stroller may unfold more slowly than usual (at room temperature).

4b

3 Install Front Wheel Unit 3

Squeeze the front wheel fork while inserting it into the frame tube. Push front wheel into frame tube until you hear a “click” (Figure 3).

Pull to confirm it is assembled securely.

5 Adjust Handlebar Height
	5
Squeeze the adjustment button
and slide the handlebar to desired
height (Figure 5). The handlebar
will click into place.
6 Parking Brake
	6
Always use the parking brake,
even when standing still for only a
few moments! Push firmly down
on the red pedal (P) behind the
rear wheel to set the parking
brake (Figure 6). Push the
opposite pedal to release the
parking brake.

3