9To Recline Seat Backs:
release
bar
Front Seat: Squeeze release bar on back of seat as shown, tilt seat back to recline position. To return to upright, squeeze release bar, pull to upright.
Rear Seat: To lower seat back, squeeze harness release on back of seat pulling release back while moving seat back to the desired position.
To raise seat back, squeeze har- ness release and push release up towards seat back while moving seat to the desired position.
10To Use Rear Seat as carriage:
seat side
arm rest
Recline seat back. Unsnap seat side from frame on both sides as shown.
wing
Lift flap beneath seat front, detach “wings” from underside of flap and fold up.
seat side | snap |
arm rest
Place “wing” between frame and seat side and attach to snap where seat side had been attached previously as shown.
seat side
arm rest | wing |
|
|
|
|
| |
Attach seat side to “wing” with two |
| When complete, carriage should appear | |
snaps as shown. Repeat for other side. |
| as above. | |
!WARNING:
Child may slip into leg openings and strangle. Never use rear seat in reclined carriage position unless the footrest is completely raised and snapped.
7