Harbor Freight Tools 95852 manual Raising the Panel, Lowering the Panel

Page 10

Raising the Panel

1.CAUTION: Always lower the Backstop (7) to prevent the Lift from rolling whenever raising a panel.

2.Crank the Winch Wheel (27) forward as shown to raise the panel to the desired level. You may wish to grasp the Winch Post (21) for leverage while doing this.

3.The Brake Hub (33) is spring loaded to hold the panel in place after cranking.

Lowering the Panel

1.Grasp the Winch Wheel (27) with your right hand to prevent it turning backwards when the brake is released.

2.While holding the Winch Wheel, release the Brake Arm (30) and allow the Winch Wheel to rotate backward at a controlled rate, to lower the panel.

SKU 95852

For technical questions, please call 1-800-444-3353

Page 10

Image 10

Contents 150 LB. Drywall Panel Hoist Specifications Save This ManualSKU For technical questions, please call Unpacking Setting up the Tripod Base AssemblyFrame Assembly with Winch and Lift Attach the Cradle to the Frame Testing the AssemblyAttach the Crossarms to the Cradle Open the Panel Support Hooks Set Up Legs and Extend the BackstopExtend the Outriggers Slide Bar LockWinch Wheel, Handle and Post Tilt LatchBrake Arm Retaining HookSafety Checks Before Operation Loading a Drywall PanelRaising the Panel Lowering the PanelDisassembly Cable Safety Information MaintenanceOptional Extension Accessory not included To Install the Extension AccessoryParts List Assembly Diagram Limited 90 Day Warranty Warranty