Attach the Cradle to the Frame
1.Insert the Cradle Post, which is part of Cradle (42) into the opening in the top of the Frame (11).
2.Attach the Cradle to the Frame by rotating the Tilt Latch (47) over the stud on the Cradle.
Attach the Crossarms to the Cradle
1.The Crossarms are interchangeable. Slide the tapered plates on both of the Crossarms (61) into the receiving sockets on the Cradle (42).
2.Press each Crossarm into its socket until the spring tab locks into place.
Testing the Assembly
With assembly completed, check the Panel Lift tool to be sure all fasteners are tight, the cable is in place and is undamaged, and the tool is safe to use.
1.Check the Tripod Base to be sure it is firmly attached to the Frame. Be sure the legs are firmly extended and locked in place.
2.Check the Frame Assembly and Winch Assembly to be sure they are properly installed and function- ing properly.
3.Check to be sure the Cradle is properly attached to the Frame.
4.Check to be sure the Crossarms are firmly attached to the Cradle.
CAUTION: Be sure the assembly is properly completed and checked for proper func- tion before using this tool.
SKU 95852 | For technical questions, please call | Page |