Tilt Latch
1.The Tilt Latch (47) allows the Cradle (41) to tilt to adjust the panel as needed for installation on sloped ceilings or walls.
2.To lock the Cradle in a level position, rotate the Latch up to engage the stud in the Cradle.
3.NOTE: When in the locked position, the cradle will tilt up to 10°
Brake Arm
1.The
2.To lower the Cradle, grasp the Winch Wheel (27) to prevent it rotating in an uncontrolled manner.
3.Raise the Brake Arm to release the Cradle, and lower it carefully with the Winch Wheel.
Winch Wheel, Handle and Post
1.The Winch Wheel (27) is used to raise and lower the Cradle, which holds the panel. This is done by means of a Cable (24) which wraps around a spool in the Winch Wheel Assembly.
2.If necessary, you can grasp the top of the Winch Post (21) for leverage when raising a panel.
3.CAUTION: Pay attention to the action of the Cable when operating this tool. Do not allow your hands, clothing, hair or jewelry to come near the Cable. If these become caught in the cable, you can be injured. Do not allow the cable to become tangled or jammed during operation.
Retaining Hook
1.Catch the Retaining Hook (26) on the end of the Frame housing (11) to prevent the telescoping portions of the tool from shifting during storage or transport.
SKU 95852 | For technical questions, please call | Page |