28 | MTM5400 Mobile Terminal Installation Manual | INSTALLATION |
|
|
|
In a vehicle with an airbag, make sure that the mounting location of the mobile terminal, or of any terminal accessory, is not in the deployment path of the air bag.
Uninstaling the radio
OPTION 1:
Before disconnecting the 13.2 V main power supply from the radio:
1.Switch off the radio.
2.Wait for a minimum of 4 seconds after the radio switch is released.
3.Disconnect the 13.2 V main power supply.
OPTION 2:
Turn off the main power supply WITHOUT switching OFF the radio.
DC Power Cable Installation
Installation Planning
This terminal must be operated only in negative ground electrical systems. Operating the terminal on a positive ground system will cause the cable fuse to
The
1.Whenever possible, avoid routing the cable above the catalytic converter.
2.Make sure that the power cable never rests on sharp edges.
3.Use grommets whenever a cable has to pass through a hole in a metal panel.
The following table lists power cables available for this terminal:
Table 1 DC Power Cables
Number | Description | Rating |
|
|
|
GKN6270 | Power Cable to battery with fuse 10 A | 12V Power Cable to Battery, Length: 3 m |
|
|
|
GKN6274 | Power Cable to battery with fuse 10 A | 12V Power Cable to Battery, Length: 6 m |
|
|
|
6500139767 | Fuse 10 A for Power Cable |
|
|
|
|
6580283E02 * | Fuse 4 A for Ignition Sense Cable |
|
|
|
|