38 | MTM5400 Mobile Terminal Installation Manual | INSTALLATION |
|
|
|
Desktop Installation
The MTM5400 may be desktop mounted. The Desktop Station option provides the terminal with the desk microphone, power supply, desk top tray (without speaker) and external loudspeaker.
If an outdoor antenna is used a proper grounded Lightning Protector with
Planning
Planning is the key to fast, easy terminal installation. Before a hole is drilled or a wire is run, inspect the location and determine how and where you intend to mount the antenna, terminal and accessories. Plan wire and cable runs to provide maximum protection from pinching, crushing, and overheating. The installation planning should only be undertaken by persons who are competent and able to ensure that the complete installation fulfils its regulatory requirements, such as EMC (Electro Magnetic Compatibility) and IEC (International Electrotechnical Commission).
Installation
1.Be sure line voltage power is available.
2.Make sure sufficient air can flow around the terminal to permit adequate cooling.
3.Choose a flat surface for the desktop tray and external loudspeaker.
4.Be sure the mounting surface is able to adequately support the weight of the terminal and tray.
5.If an outdoor antenna is used choose a location for the terminal as close as possible to the antenna cable inlet of the building. Make sure that the installation of the surge protector is in accordance with the manufacturer’s specifications and safety hints. The line voltage power supply shall be grounded properly.