Baby Trend CS0190B0211 manual Crotch Strap, Operation of the Carry Handle, Seat Angle Indicator

Page 14

5.0FEATURES

Crotch Strap

The crotch strap is adjustable in length to ensure a safe and comfortable fit for harness.

5.0FEATURES

5.7 Operation of the Carry Handle

• The Carry Handle has three positions:

the upright carry position, a mid-storage

position, and the non-rocking position.

Seat Angle Indicator

The Seat Angle Indicator is used to ensure that the seat is installed at the proper degree of recline to adequately protect your child in a crash.

RRECT

 

CO

 

G

ds

WRON

 

 

 

 

20poun

 

 

 

(9kg)

and

 

 

 

r

 

 

 

unde

 

 

 

20to30

 

 

 

ds

 

 

 

 

poun

 

 

(9to

13.6kg)

 

 

 

 

 

Seat Angle Indicator

• Depress the two buttons located on the

handle just above the connection to the

Safety Seat shell to release the handle.

• Slowly rotate the handle to the desired

position. The buttons should pop out

and the handle should automatically

lock into the new position.

• Before lifting the Safety Seat, push on

Upright Carry

Locking Clip

The Locking Clip is stored under the pad on the right side of the Safety Seat and is used to securely install the Safety Seat with certain types of vehicle lap/ shoulder combination belts.

Seat Angle Adjuster

Locking Clip

the handle to check that both sides of

the handle have locked into place.

• Use the Mid Storage or non-rocking position

when the Safety seat in the vehicle.

Mid Storage in vehicle position

The Seat Angle Adjuster raises and lowers the rear of the Base in order to obtain the proper angle of recline for proper installation of the Safety Seat when using the Base.

26

Seat Angle Adjuster

Non Rocking in

Rotate the Handle

vehicle position

 

27

Page 13 Page 15
Image 14
Page 13 Page 15
Contents FLEX-LOC Table of Contents Register HOW to Register Your Safety SeatYour child’s safety depends on Safety Standards SafetySafety Information About your childAbout use as a carrier About Active Air Bags About an unoccupied Safety SeatAbout this Safety Seat Safety Overall Considerations in Selecting a Location Selecting the Best Location for the Safety SeatLocation Check that the Vehicle Seat Belt is Safe to Use Location Seat belt Fig Lap/shoulder combination seat belt with Rear view of Adjustable Back Model Features Safety Seat Features and Their Proper USE 5-Point HarnessLock Button Rear View of Fixed Back ModelBase Latch Connectors Use of the Safety Seat with the BaseOther Features Harness Crotch Strap Seat Angle IndicatorSeat Angle Adjuster Operation of the Carry HandleSlip the canopy stays through the sleeves on the canopy Adjustment of the Shoulder StrapsAttaching the Canopy Or crashRemove both Harness Straps from the Belt Turn the seat over. Locate the Belt AdjusterAdjuster Plate. Fig Will see the crotch strap anchor clip Safety Seat. FigFrom the Safety Seat. Fig Car seat shell. Pull outwardInfant Restraint Using Infant RestraintSecuring your Child in the Safety Seat / Carrier For the 5-Point Harness InstallationSecuring the Safety Seat or Base in the Vehicle Preparation Seat. Fig Through the Safety Seat without the BaseTo tighten a lap belt only Installation of the Base using Latch Connector to release the connector On the Latch connector to loosenThat the Latch connector can not be To remove the base from the vehicleSetting Proper Recline of the Safety Seat / Base Final Checks Final Safety ChecksSafety Seat or Base in the Vehicle ADD’L Information Using the Safety Seat in an AirplaneFor care and maintenance see fabric tag Additional InformationReplacement Parts
Top Page Image Contents